A64 4400 CCBWE 0522 TPMW idles fine in windows at -27.
Opteron 144 CABGE 0536 VPMW and CABYE 0536 GPMW over 345HTT instant freeze in windows when temp goes lower -27 and if bios temp is lower -25 over 345 cant load windows both of them same behaviour.Below 335 HTT no cold bug when sitting idle in windows.........
Opteron 175:
CCBWE 0550UPMW
Coldbug free atleast up to -35c (can´t try any colder)
Opteron 148:
CAB2E 0547GPMW
Coldbugged even at -10c.
I find that very hard to believeOriginally Posted by The Stilt
Been busy answering pms will update shortly as its time consuming.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
BUMP for more steppings............
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
CAB2E Opto 144 0540 FPMW
Bugged at -25 idle and still bugged at -5 loaded.
Had postive temps through deliberate bad contact to try and clear it but nothing great. Couldnt pass 255x9 at any temp.
______
Sometimes, it's not your time. Sometimes, you have to make it your time. Sometimes, it can ONLY be your time.
No subzero her, but my CAB2E 0546GPAW coldbugged at +14°C ...
PC : Asrock Z68 Extreme3 Gen3 + Intel Core i5 i2500k + 2 x Asus HD6870 DirectCU + 2x2GB PC12800 G.Skill Eco 7-8-7-24 + Creative X-Fi Titanium PCIe + Scythe Mugen 3.
Digicam : Pentax *istDL2 + Pentax smc DA 18-55mm F3.5-5.6 AL + Cosina F3.5/100mm Makro.
Heimkino : Samsung LE-46B450 FullHD + Arion AF-4000HDCI + Onkyo TX-SR505E + Quadral Quintas 5.0 + Heco Victa 25A.
looks like BL is the best one...
@Funkflix: OW!
@Revv....I got to that conclusion as well....the search has startedI had a Venice BL 3500+ that only did 2.6 under air...600+Mhz under phase would be a nice boost
______
Sometimes, it's not your time. Sometimes, you have to make it your time. Sometimes, it can ONLY be your time.
Opti 150 CABGE 0534 SPMW no cold bug to -32C
San Diego 3700+ CABGE 0515 no cold bug to -32C
Both fine under single stage even at stock volts and no heat tweeks but cant function under dice.
MB Reviewer for HWC
Team OCX Bench Team
Interesting. BY seems to be doing pretty well under phase. I need fo find someone who has phase around my house.
Hey charlie, mind if I come over to simi sometime?
CCBWE 0536 MPMW Opteron 165 Cold bug @ 355HT -5° cpu.
Updated, Keep them coming thx.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
It seems for the most part, that the opties tend to have the cold-bug kick in @ higher temps than the regular a64's/Fx's of the same memory controller rev. That may be of something to note
agreed steven..better silicon i'm guessing...which you already saidIt seems for the most part, that the opties tend to have the cold-bug kick in @ higher temps than the regular a64's/Fx's of the same memory controller rev. That may be of something to note
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
It seems for the most part, that the opties tend to have the cold-bug kick in @ higher temps than the regular a64's/Fx's of the same memory controller rev. That may be of something to note
very much so agreed, ijt would be interesting to know why an opty cabne cant go nearly as cold as an FX cabne.
It seems to me a fast die that would end up in an FX doenst always mean that it will take the cold, just look at all these FX stepping opterons that cant touch the temps that the majority of FX's are able to take. Perhas there is more to amd binning hten we once thought.
Ive said this before, but here it is once again:
The s939 "Opties" aren't true Opterons like the s940 server/workstation cpu's from AMD. Instead, these s939 versions are a means for AMD to rid themselves of any "extra" San Diego cores they have left. The fab process is moving to dual cores only and the new E6 "single core" Diegos reflect this change (dual core with one core disabled)....
fair enough, but why bother with dual core opties if you are just clearing out stock?
Same reason why they don't just sell these Opties as regular Diegos
Opti 148 CABYE 0543 FPMW
phase -30C idle/-6C load = no bug
ice not tested yet
FX57 CABNE 0530 APMW
phase -36C idle/-14C load = no bug
ice -50C idle/-24C load = BUG
Last edited by tarrcm; 02-05-2006 at 08:24 PM.
AMD Athlon FX57
DFI NF4 Expert
Crucial Ballistix Tracer (2x1GB) PC4000
Mushkin Redline XP4000
850 SSI PSU
x2 3600 E6 CCBWE 0546UPMWcold bugs below -26C and above 255 HTT.
By reducing the LS fans to 30%, I can mostly keep the core at a degree or two above the bug at boot time - booted 277 HTT this way. Needs a load once booted, else it locks up and/or BSODs if it gets down to -26C above 255.
Dumo was right - evap needs to be above -37C for this to work.
Opti 165 CCBWE 0550 UPMW no cold bug to -32C. Dice testing next week.
MB Reviewer for HWC
Team OCX Bench Team
4000+
CABHE 0505fpmw
Cooled by mach2 to -25 cpu temp, no bug so far
Gigabyte P35C-DS3--E6600 L628B123--2x1GB Gskill Pc6400HZ+1GB D9GMH OEM--Sapphire x1900XTX--Tagan 580w--GFX Watercooled--Cpu Cooled By Mach2 GT modded by Jort
Winnie 3500+ CBBID ----------> -41º
Sandy 3700+ CABGE -----------> -27º
Manchester 3800+ CCBWE -----> -26º
Only tried on dice the winnie. Will post results on the sandy + dice within a coupple of weeks.
Intel Core 2 Quad Q6600
GSkill F2-8000CL DDR2-1000 2x2GB
Abit IP35 Pro
XFX NVidia GeForce 6800GT @ 435/1210Mhz
2x WD Raptor 36GB RAID 0
Antec TruePower Quattro 1000w
Windows Vista Ultimate x64
Posting Permissions
Reply With Quote
Bookmarks