MMM
Page 12 of 21 FirstFirst ... 29101112131415 ... LastLast
Results 276 to 300 of 514

Thread: The Official San Diego Overclocking Thread

  1. 12-15-2005, 08:12 PM #276
    spdycpu
    spdycpu is offline
    Registered User
    Join Date
    Nov 2005
    Location
    Plano, TX
    Posts
    82
    Send a message via ICQ to spdycpu Send a message via AIM to spdycpu
    Quote Originally Posted by spdycpu
    Anyone ever get a bunk KAB2E? My chip is as follows:
    ADA3700DAA5BN / KAB2E 0538BPMW.

    The absolute max I can prime out of it is 1.61v actual (1.55v set in bios) at 2.7GHz. This is on a DFI NF4 Ultra-D board (6/23 bios), an Athena power 650 watt PSU, and liquid cooling. CPU never gets above 40C. I lowered my HTT, relaxed the memory timings, tried various combinations of memory dividers, cpu multipliers, fsb, etc. I've tried running 1.45v * 113% which gives me about 1.6v in windows, BUT, when measure it from the surface mount capacitors near the CPU socket it shows 1.655v idle, 1.67v load! That voltage at 2.8GHz was completely unstable as well, failed prime95 instantly. Is there something I am missing? Any suggestions? Any tips would be appreciated, thanks.
    Update:

    Well, apparently it is my trashy KAB2E. A friend of mine got the EXACT same setup as me, I took pictures of my bios settings and he's using those. Turns out his KAB2E (same stepping, date code, everything) is doing 2.85GHz in a high ambient with the stock HSF where mine only does 2.7GHz with a low ambient on liquid. Do I take the record as having the worse KAB2E so far?? :P
    Reply With Quote Reply With Quote
  2. 12-16-2005, 06:14 AM #277
    El Snorro
    El Snorro is offline
    Xtreme Member
    Join Date
    Jun 2004
    Posts
    314
    Send a message via MSN to El Snorro
    Made a mistake with the 2 cpuz windows, the lowest one should be 'memory' tab...
    1,47v 3+ghz
    boxed cooled haha
    Cabhe0505Fpmw batch 0052

    Gigabyte P35C-DS3--E6600 L628B123--2x1GB Gskill Pc6400HZ+1GB D9GMH OEM--Sapphire x1900XTX--Tagan 580w--GFX Watercooled--Cpu Cooled By Mach2 GT modded by Jort

    Reply With Quote Reply With Quote
  3. 12-18-2005, 01:36 PM #278
    hornet
    hornet is offline
    Xtreme Member
    Join Date
    Mar 2005
    Location
    Alcácer do Sal - Portugal
    Posts
    100
    Send a message via MSN to hornet
    SanDiego 3700+ - 2200@2937Mhz - 1.62v-core - 24/7
    0516
    Reply With Quote Reply With Quote
  4. 12-18-2005, 03:18 PM #279
    coop
    coop is offline
    Dr. / Professor
    Join Date
    Apr 2004
    Location
    Phoenix,USA
    Posts
    760
    Nice Snorro, that is running really well. Is that one you recently got? New? From?
    8 hrs Prime @ 4500 (9x500) DDR-1200
    9.59 32m Pi @ 4810 (8.5x566)
    9.59 32m Pi @ 4gb DDR 1248
    700 Club @ 7 x 585 CPU-Z Val
    Prime @ 542 x 7 (4 hrs 1.28v)
    32m 5006 (9.48)

    OC Formula 3770k-dl G.Skill 2666 C10 Galaxy 660Ti 3gb Apogee HD PlextorM5P xfx p850
    MVF 3770k Team 2600 C10 xfx 7850 2gb xspc RayStorm HyperX 3k Hyper 730
    Gigabyte EP45-UD3P e8500 Crucial 8500 khx9600 evga 9800gtx PCP&C 610 H20 by Coop



    Reply With Quote Reply With Quote
  5. 12-19-2005, 03:51 AM #280
    TH€_BR@!N
    TH€_BR@!N is offline
    Registered User
    Join Date
    Mar 2005
    Location
    Germany, Hannover
    Posts
    51
    System: (siehe sig)
    - Mobo = DFI nf4 SLI-DR
    - LuKü = Thermaltake Big Typhoon @ 700-900rpm !!!

    CPU:
    - AMD 3700+ San Diego
    - Stepping: 0548BPMW
    - CPU with HS
    - Temperatures default 36 - load 44c


    @ 12h Prime95 Stable 2915Mhz @ 1,37v


    @ OCCT Stable 2915Mhz @ 1,37v


    @ Super PI Mod 1.4 32M Stable - 2915Mhz @ 1,37v (dont look at the super pi time, i have work on my pc. Only Stable bench!!!


    @ 3135Mhz @ 1,50v
    - prime come later...
    Reply With Quote Reply With Quote
  6. 12-20-2005, 01:18 PM #281
    koSmiQ
    koSmiQ is offline
    Registered User
    Join Date
    Jan 2004
    Location
    Sweden
    Posts
    15
    Send a message via ICQ to koSmiQ
    Since this is the San Diego thread maybe someone has any information about this stepping:
    KAB3E 0548BPMW

    A search turned up nothing so therefore I ask... Any input appreciated.
    Reply With Quote Reply With Quote
  7. 12-22-2005, 03:07 AM #282
    bladebel
    bladebel is offline
    Registered User
    Join Date
    Dec 2005
    Posts
    49
    hi,

    i have a 3700+ SD:
    ADA3700DAASBN
    KAB2E 0538APAW

    that does 2850 aircooled primestable

    anyone else have a similar stepping ? should I be able to get this much higher? Load temps @ around 41, idle around 31; vcore at about 1.6

    will show pics this weekend ...

    oh yeah: merry x-mas and a happy newyear !
    Reply With Quote Reply With Quote
  8. 12-23-2005, 10:16 PM #283
    althes
    althes is offline
    Xtreme Mentor
    Join Date
    Oct 2002
    Location
    boston,ma
    Posts
    3,184
    Quote Originally Posted by bladebel
    hi,

    i have a 3700+ SD:
    ADA3700DAASBN
    KAB2E 0538APAW

    that does 2850 aircooled primestable

    anyone else have a similar stepping ? should I be able to get this much higher? Load temps @ around 41, idle around 31; vcore at about 1.6

    will show pics this weekend ...

    oh yeah: merry x-mas and a happy newyear !
    just got the same one as you testing it now.
    Abit KN9-SLI
    X2 3800+
    1gb corsair pc5400
    2 evga 7900gt
    200gb maxtor sata
    ocz 520w
    heatware:althes
    ebay althes
    Reply With Quote Reply With Quote
  9. 12-25-2005, 03:33 AM #284
    bladebel
    bladebel is offline
    Registered User
    Join Date
    Dec 2005
    Posts
    49
    exciting :-) any news yet ? i still hoover around 2830 - 2850, not sure if i should up the voltage even more (now @ aircooling with xp120) to go higher...
    Reply With Quote Reply With Quote
  10. 12-25-2005, 07:40 AM #285
    gabb
    gabb is offline
    Registered User
    Join Date
    Jan 2005
    Location
    Germany/Croatia
    Posts
    28
    Nice, finally a few people with the same stepping, got the 0538 APAW as well and testing it right now
    New rig: work in progress

    Old rig: DFI Ultra-D Rev. A3 | A64 3700+ Sandy 0538 APAW @2,8GHz on SI-120 | OCZ PC4800 1GB Platinum Kit @ DDR622 2,5-4-3-8-1T | EVGA 7800GT CO | Seasonic S12-430W
    Reply With Quote Reply With Quote
  11. 12-27-2005, 10:52 AM #286
    El Snorro
    El Snorro is offline
    Xtreme Member
    Join Date
    Jun 2004
    Posts
    314
    Send a message via MSN to El Snorro
    Quote Originally Posted by coop
    Nice Snorro, that is running really well. Is that one you recently got? New? From?
    It is second hand, the guy i bought it from got it directly from amd
    Gigabyte P35C-DS3--E6600 L628B123--2x1GB Gskill Pc6400HZ+1GB D9GMH OEM--Sapphire x1900XTX--Tagan 580w--GFX Watercooled--Cpu Cooled By Mach2 GT modded by Jort

    Reply With Quote Reply With Quote
  12. 12-28-2005, 05:22 AM #287
    Wezz
    Wezz is offline
    Registered User
    Join Date
    Dec 2005
    Location
    FRANCE
    Posts
    14
    Send a message via MSN to Wezz
    Hello, my FX 57 is a :

    AMD Athlon 64 FX
    ADAFX57DAA5BN
    CABCE 0516WPMW
    1241732E50xxx

    How far goes my CABCE 0516 WPMW core 732 ?
    FX57@3.168GHz DFI SLI-DR Expert Crucial Ballistix PC4000 2*1GO 2*Asus 7800GTX@1380/492MHz Watercooled
    Reply With Quote Reply With Quote
  13. 12-28-2005, 06:29 AM #288
    Wezz
    Wezz is offline
    Registered User
    Join Date
    Dec 2005
    Location
    FRANCE
    Posts
    14
    Send a message via MSN to Wezz
    FX57@3.168GHz DFI SLI-DR Expert Crucial Ballistix PC4000 2*1GO 2*Asus 7800GTX@1380/492MHz Watercooled
    Reply With Quote Reply With Quote
  14. 01-04-2006, 05:07 AM #289
    ugp
    ugp is offline
    Xtreme Addict
    Join Date
    Aug 2004
    Location
    Inverness, Florida
    Posts
    1,876
    Send a message via AIM to ugp Send a message via MSN to ugp Send a message via Yahoo to ugp Send a message via Skype™ to ugp
    Well I got my San Deigo back in and going to see what I can do with it again. Maybe I will go for some high FSB speeds and max out my RAM first. I was getting DDR600 with my OCZ Plat Rev. 2 right before I took it out last time. But I do need some help tweaking these SD Cores for high clock stability.

    Does anyone know this Stepping by chance or seen it?

    [CABGE 0518UPCW]

    27" iMac
    3.06GHz Core 2 Duo
    8GB DDR3
    1TB HDD + 2TB Ext + 1TB Ext
    ATI HD 4670 256MB

    20" iMac
    2.4GHz Core 2 Duo
    2GB+1GB G.Skill DDR2
    320GB HDD
    ATI HD 2600 Pro 256MB

    16GB iPhone 3GS

    GamerTag: ugp
    GamerTag: SadisticPuppets
    Reply With Quote Reply With Quote
  15. 01-04-2006, 06:17 AM #290
    DesertShooter
    DesertShooter is offline
    Xtreme Member
    Join Date
    Mar 2005
    Location
    Netherlands
    Posts
    322
    I'm getting a new SD this week. Are all SD's KAB3E/KAB2E? They are heavily cold bugged.
    DesertShooter.nl
    Reply With Quote Reply With Quote
  16. 01-05-2006, 04:15 PM #291
    STONKA
    STONKA is offline
    Registered User
    Join Date
    Oct 2004
    Location
    Frankfurt am Main GER
    Posts
    50
    Send a message via ICQ to STONKA Send a message via Yahoo to STONKA
    Her is my Old 0508EPMW Batch 2 !! Cooled with Water no IHS !!

    Reply With Quote Reply With Quote
  17. 01-13-2006, 06:11 AM #292
    bladebel
    bladebel is offline
    Registered User
    Join Date
    Dec 2005
    Posts
    49
    Quote Originally Posted by althes
    just got the same one as you testing it now.
    Quote Originally Posted by gabb
    Nice, finally a few people with the same stepping, got the 0538 APAW as well and testing it right now
    nothing yet ?

    is it because I is black ?
    Reply With Quote Reply With Quote
  18. 01-14-2006, 03:37 AM #293
    DuKe_GR
    DuKe_GR is offline
    Registered User
    Join Date
    May 2005
    Posts
    3
    3700+ San Diego
    KACAE 0547RPBW



    DFI nf4 sli-d ,San Diego 3700+~Black Ice XTREME II,Eheim1250,cpublock 11 ,2x512MB Mushkin Level2 V2 PC3200(2-2-2-5)@270(3-4-4-10) ,GB 6600GT@575_1200,OCZ Powerstream 600
    Reply With Quote Reply With Quote
  19. 01-14-2006, 04:25 AM #294
    saaya
    saaya is offline
    Xtreme X.I.P.
    Join Date
    Nov 2002
    Location
    Shipai
    Posts
    31,147
    Quote Originally Posted by bladebel
    nothing yet ?

    is it because I is black ?
    Reply With Quote Reply With Quote
  20. 01-14-2006, 02:37 PM #295
    bladebel
    bladebel is offline
    Registered User
    Join Date
    Dec 2005
    Posts
    49
    Quote Originally Posted by saaya
    it's an Ali G thing
    Reply With Quote Reply With Quote
  21. 01-16-2006, 01:07 PM #296
    uF4No
    uF4No is offline
    Registered User
    Join Date
    Sep 2005
    Location
    Zamora, Spain
    Posts
    27
    hello all!!
    I've got a 3700+San Diego CABHE 0525UPMW cooled with XP90 + Papst.
    here you have my screens:
    this is my 24/7 configuration:
    http://img32.imageshack.us/my.php?im...bles16h0li.jpg

    And this is tha max MHz I got with 1,5v (this is my first oced processor and i'm a litle scared to give him more volts):

    http://img66.imageshack.us/my.php?im...1m296578zz.jpg

    What do you think about this chip??

    PD: sorry for my bad english
    Last edited by uF4No; 01-16-2006 at 01:10 PM.
    Rig: DFI LANParty UT nForce4 Ultra-D rev. AD0, AMD64 Opteron165 @2900MHz 1,44v CCBBE 0615EPMW WCed, Kingston HyperX 2x1Gb DDR400@530MHz 3-3-3-8, Sapphire Radeon 3850 512Mb, WesternDigital 500Gb + Maxtor DiamondMax 10 200Gb, Tacens Valeo Smart 560W
    Water Cooling: Swiftech Storm Rev.2, Danger Den D5, Black Ice GT Stealth 240, 2*YateLoon Mid
    Reply With Quote Reply With Quote
  22. 01-18-2006, 02:08 PM #297
    MrSlacker
    MrSlacker is offline
    Xtreme Member
    Join Date
    Mar 2005
    Location
    NYC
    Posts
    131
    Send a message via ICQ to MrSlacker Send a message via AIM to MrSlacker
    I have KAB2E 0538BPCW that I got back in November. They most i can get out of it is 2.7Ghz. Max HTT is 305. No matter what I do, it wont go higher. Already tried 2 different motherboards. Gonna try to sell it and get something new.
    Reply With Quote Reply With Quote
  23. 01-18-2006, 02:15 PM #298
    Crazy Inside
    Crazy Inside is offline
    Registered User
    Join Date
    Nov 2005
    Location
    Portugal / Lisbon
    Posts
    25
    Hi,

    i have a San Diego 3700+ CABGE 0522XPMW




    My SD 3700+ day-at-day - 1.550V - WC



    My memorys - GEIL ONE TCCD 2x512MB (2.9V)


    suicide shot



    super PI



    My Machinne:
    DFI NF4 ULTRA-D
    SAN DIEGO 3700+
    GEIL ONE TCCD 2x512MB
    CONNECT3D X800 GTO (whit 16 pipes)
    POWERSTREAM 520W
    Last edited by Crazy Inside; 01-18-2006 at 05:09 PM.

    San Diego 3700+ @3171.96MHz / Opteron 148 @3363.3MHz / Q6600 G0 @4503.05MHz / E6700 @4701.35MHz / E6850 @4814.91MHz / Conroe E6600 @4911.04 MHz / E8500 @5516.74MHz
    Reply With Quote Reply With Quote
  24. 01-19-2006, 09:47 PM #299
    coop
    coop is offline
    Dr. / Professor
    Join Date
    Apr 2004
    Location
    Phoenix,USA
    Posts
    760
    @Crazy Inside
    3.2v wtf ? It looks like it is reading 2x actual V.
    8 hrs Prime @ 4500 (9x500) DDR-1200
    9.59 32m Pi @ 4810 (8.5x566)
    9.59 32m Pi @ 4gb DDR 1248
    700 Club @ 7 x 585 CPU-Z Val
    Prime @ 542 x 7 (4 hrs 1.28v)
    32m 5006 (9.48)

    OC Formula 3770k-dl G.Skill 2666 C10 Galaxy 660Ti 3gb Apogee HD PlextorM5P xfx p850
    MVF 3770k Team 2600 C10 xfx 7850 2gb xspc RayStorm HyperX 3k Hyper 730
    Gigabyte EP45-UD3P e8500 Crucial 8500 khx9600 evga 9800gtx PCP&C 610 H20 by Coop



    Reply With Quote Reply With Quote
  25. 01-21-2006, 02:55 AM #300
    STONKA
    STONKA is offline
    Registered User
    Join Date
    Oct 2004
    Location
    Frankfurt am Main GER
    Posts
    50
    Send a message via ICQ to STONKA Send a message via Yahoo to STONKA
    At now my new SD With IHS cooled by Water !







    Toomorow we broke 3250Mhz
    Last edited by STONKA; 01-21-2006 at 02:59 AM.
    Reply With Quote Reply With Quote
Page 12 of 21 FirstFirst ... 29101112131415 ... LastLast
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules