NF3/NF4 & BH-5/BH-6/UTT - Highest stable clocks - REPORT IN !!!

[HiJon89]

Opteron 148 @ 264x11 = 2904Mhz
2x512MB OCZ PC3500 Platinum Ltd. Edition BH-5 @ 264Mhz 3.31V
Rest of info in my sig.

These bad boys definitely have some more in them, but this is about the max of my CPU with 11 multi. I'll drop it down to 10 tomorrow and see if I can't set the record

Small update:

Opteron 148 at 2.7Ghz (10x270)
2x512MB OCZ PC3500 Platinum Ltd. Edition BH-5 @ 270Mhz 3.4V
Rest of info in my sig.

EDIT: Forgot to mention, Bank Interleave still enabled.

[Rolf]

Small Test with new DFI nF4 Ultra-D: 260Mhz 1,5-2-2-0 (all Timings tweaked) @ 3,28VDimm couple of hours Prime-Blend stable... BUFFALO Value with new BH5 - that's cheeeeeeap! Sticks runnin' passive, only PWM @ 80mm Fan. PSU is an AcBel 400W



Timings:

[kaze]

My results are to bad to show, I thought I would ask you guys with DFI Lanparty UT NF3 to help me a little bit (guys who dont have that mobo can help me if they can to ) I have 2gb of BH5 , 4x512, 3xOldschool 1x Speed Premium, 2 of the oldschool are almost identical, ~3errors in test5 DDR500 3.18v (single channel) but if I try to run them in dual channel mode they wont even do 240 with 3.2-3.6v. The CPU is a SD 3700+ running at 273x11 (for now with a 166 divider) I know that both of them are good for at least 260+ so I think ive missed something, im curious about one setting in bios (but I dont know the name of it) the values are "not reduction" "15% reduction" "30% reduction" "50% reduction" or something like that, dont know wich one of them to use since I dont know what it means. running BIOS 711 btw.

[gsan]

here is mine 2x512MB Gskill GH UnTesTed BH5, doing 255 @ 2225 with divider at 3.68v.



by the way, uOpt, although your ram speed & cpu speed is much higher than mine, but my result seem better than you. wonder why?

[sierra_bound]

2X512 Corsair PC3200C2 Rev1.1 (BH-6) @ 3.72v
DFI SLI-DR Expert



http://valid.x86-secret.com/show_oc?id=66085

[HiJon89]

Got 272Mhz stable. Here's a shot of 1095 passes of Test #5 with 0 errors at 272Mhz 3.47V:
http://img.photobucket.com/albums/v6...272Memtest.jpg
and here's a 32M at 272Mhz 3.52V:
http://img.photobucket.com/albums/v6...H-5/27232M.jpg
Bank Interleave still enabled.