i tried that yesterday at 2.6GHz and my results are constantly going between 0.204 and 0.219..........0.204,0.219,0.204,0.219,0.204,0.219 ,.....Originally Posted by need.for.mhz
i tried that yesterday at 2.6GHz and my results are constantly going between 0.204 and 0.219..........0.204,0.219,0.204,0.219,0.204,0.219 ,.....
It should be mentioned that there are two tweaks in this file which may cause problems for users!!!!hey k|ngp|n
I attached all regtweaks in 1 file that can speed up calculation. I included one of the most important onesAll tweaks are labeled inside, oped with something like notepad to check them out
will work on xp, x64 xp and servers, server 2003
That's only 2.47kb. Unzip it and double click on .reg file, press yes to apply them and reboot. PM me if you want more.
The first tweak is:
;----- AMD Processor Fix
;----- dword:00000100= 256KB SecondLevel Cache, dword:00000200 = 512KB SecondLevel Cache, dword:00000400 = 1024KB SecondLevel Cache
;-----
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Session Manager\Memory Management]
"SecondLevelDataCache"=dword:00000200
This is not AMD specific AND it forces windows to think you have the set amount of L2 cache which can cause your OS to become unbootable or unstable if set incorrectly. This tweak is not recommended since the OS controls this by itself anyways.
The second tweak is
;----- Optimize System Cache Size (might cause data corruption if you have ATI vid card and 1 gig of ram)
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Session Manager\Memory Management]
"LargeSystemCache"=dword:00000001
As stated it may cause corruption... use at your own risk.
There are also more tweaks located in a thread pertaining to BattleField 2 with 4gb of ram.. somewhere around these forums.
All along the watchtower the watchmen watch the eternal return.
yeap i had massive problems booting the damn thing just now after applying those tweaks last night and shutting down......back up OK.....damn those tweaks gave me a headache......thanks for confirming those exact problems STEvil
HOW THETHE I GO BACK TO DEFAULT SETTINGS.............I DON'T KNOW WHAT THEY ARE
i managed to get into windows by pressing F8 on start and selecting LAST GOOD CONFIGURATION.........did that go back to defaults or do i need to do that myself.....and how so
Last edited by dinos22; 01-11-2006 at 04:54 AM.
next time backup youre register before tweaking
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
next time backup youre register before tweaking
Second level data cache is pretty harmless from my experience, i use it all the time, and if i change from a 1Mb lvl2 to a 512kb lvl2 chip i just change the reg entry after ive swapped and booted up (without a problem)
That is amazing Mr King2003 server OS and you should have WR for AMD PI.
Abit IC7 P4 2.8a @4.21 | P4 3.4e @4.9 | Gainward 6800GT GS @486/1386
Asus P4P800 SE Dothan 730-PM @ 2900 | EVGA 6800 Ultra GS @521/1376
e8400@4.3G & 8800GTS G92 800/1932/1132 as gaming rig 24/7
Custom self build chillbox with watercooling @-28c 24/7 | chilled wc " cpu -18c idle/-3c load
3DMark 2005 Score Dothan & 6800U
3DMark 2005 Score p4 & 6800GT
i can download it legally, are there a lot of tweaks for it??
can you nlite it??
very nice results btw, keep up the good work
technicall yes, through MSDN lol.. really no
yes, same as winxp
yes any windows AFAIK
Dell Studio XPS16... no desktop
yes i have AIM, yes you can send me a message. EvilSpork3 i dare you.
its because i follow a ict education at school
its called www.ma3D.com
And kp, i bed you are a: trying to get it stable on 4g. b: you are testing all the tweaks :P
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
I am so sick of installing diff OS's and running milliion diff settings and recording results Waus.
The chip will get frozen again tommorrow... to try for some crazy things.
I should be armed with some better OS tweaking.
Last edited by k|ngp|n; 01-13-2006 at 09:07 AM.
go for it
Good luck.
A bit OT:
Why is Win2K3 better for benching?
It's lighter or what?
Just a hint:
Stock Windows Server 2003 x64 will smoke any heavily tweaked OS in SuperPI. All fun begins when you start tweaking that OS
nLite is awesome, you should use it, I support nLite development since 2004, test betas, fix code etc. author of that app is my close friendcan you nlite it??
hacking few .sys and .dll won't hurt either
@dinos22
clear your prefetch folder
SecondLevel Cache can't hurt your system, Windows don't even care about that entry
LargeSystemCache hurting your OS is RARE, I never seen it happen but somebody reported that once
Guys I'm planning to write ultimate tweaking guide, bringing OS to its knees, but I can't promise that yet
Last edited by nfm; 01-13-2006 at 05:49 PM.
Q6600 3.6Ghz @ 1.276v | DFI LP LT P35 | Ballistix Tracer PC2-8500 600Mhz @ 2.074v | GeForce 260 GTX | Auzen X-Fi Prelude | PCP&C 750 | Arch Linux ~ WinXP
AMD Athlon 64 X2 3800 | DFI LANParty NF4 SLI-DR | 2x512MB G.SKILL PC3200 BH-5 | OCZ PowerStream 520W | Palit GeForce 9600 GT | Gentoo
Long Live DFI.
can you tell me how to do that
Hi @dinos
I made small .exe program tha will do the job (just a simple compiled .cmd)
Cleans your HDD from junk files, applies RegTweaks and also cleans prefetch folder.
A program will tell what he'd deleted, some files that it deletes are .tmp files (temporary files)
You should restart you PC after rynning that .exe a few time
by that Windows will recreate fresh prefetching files. Your first boot after first restart should be the longest one because Windows will create list of things that he will load on next bootup
Q6600 3.6Ghz @ 1.276v | DFI LP LT P35 | Ballistix Tracer PC2-8500 600Mhz @ 2.074v | GeForce 260 GTX | Auzen X-Fi Prelude | PCP&C 750 | Arch Linux ~ WinXP
AMD Athlon 64 X2 3800 | DFI LANParty NF4 SLI-DR | 2x512MB G.SKILL PC3200 BH-5 | OCZ PowerStream 520W | Palit GeForce 9600 GT | Gentoo
Long Live DFI.
does it apply to Windows 2003 server as well
@dinos
that's just cmd and regs, will work on all todays MS OSes
XP and up till Server 2003, 32-bits and 64-bits, will run on all
Q6600 3.6Ghz @ 1.276v | DFI LP LT P35 | Ballistix Tracer PC2-8500 600Mhz @ 2.074v | GeForce 260 GTX | Auzen X-Fi Prelude | PCP&C 750 | Arch Linux ~ WinXP
AMD Athlon 64 X2 3800 | DFI LANParty NF4 SLI-DR | 2x512MB G.SKILL PC3200 BH-5 | OCZ PowerStream 520W | Palit GeForce 9600 GT | Gentoo
Long Live DFI.
Uh! Please do!
AMD 4ghz benchmark superpi 1m stable is done!!!
dragonpot ln2
DFI SLI-D
2x512 mushkin bh5
validate
http://valid.x86-secret.com/show_oc?id=64186
I would like the time to be about .15 lower at least at these clocks. I had 3 lite'd xp, 2k3, and 2k364 drives setup on sep partitions before session ready to rock and for some unknown reason, It was hardlocking like mad so I had to go back to my 3d benching drive I used before
Last edited by k|ngp|n; 01-14-2006 at 11:45 PM.
First REAL 4GHZ on AMD! That is just sick KP, big time congradulations on that! I know you can do 20s with a bit more tweaking. And hey you're still running IHS on and low voltage!
need.for.mhz> I'd love to see a guide on that! I really know next to nothing about registry and OS tweaking. I'll try that patch on my bench setup when my 170 comes monday. I'll look into 64 bit server 2k3 as well.
Phenom II 940 BE / ASUS M4A79 / HD5770 Crossfire
3770mhz CPU 2600mhz NB | DDR1040 5-5-5-15 | 900/1250
big congratsAMD 4ghz benchmark stable sp1m stable is done!!!
dragonpot ln2
DFI SLI-D
2x512 mushkin bh5
validate
http://valid.x86-secret.com/show_oc?id=64186
I would like the time to be about .15 lower at least at these clocks. I had 3 lite'd xp, 2k3, and 2k364 drives setup on sep partitions before session ready to rock and for some unknown reason, It was hardlocking like mad so I had to go back to my 3d benching drive I used before
Very good stuff there kingpin!!!!
Anyway, can't wait to see some more results getting more out of it!
Thats A CHIP
Congrats KP...Now you can retire that single core monster
Posting Permissions
Reply With Quote
Bookmarks