mmm... same step and date as my 3700+. Wanted to try it under dice, but now that I read that... damn... Well, will try it anywayOriginally Posted by Eldonko

 
			
			mmm... same step and date as my 3700+. Wanted to try it under dice, but now that I read that... damn... Well, will try it anywayOriginally Posted by Eldonko

Intel Core 2 Quad Q6600
GSkill F2-8000CL DDR2-1000 2x2GB
Abit IP35 Pro
XFX NVidia GeForce 6800GT @ 435/1210Mhz
2x WD Raptor 36GB RAID 0
Antec TruePower Quattro 1000w
Windows Vista Ultimate x64
 
			
			/nod I could get better speeds from it under phase, temps just above cold bug. Maybe yours will have no cold bug though, never know until you try.Originally Posted by PoL

MB Reviewer for HWC
Team OCX Bench Team
yeah, give it a shot, and seeing results from the same week, stepping or batch num. will help us figure out if the bug has any patterns that we can follow. Great work guys! thanks!
Heatware | Ebay:Crazymullen | If you are unsure what Fhqwhgads means You are REQUIRED to go HERE| Powered by Centon Ram
IMHO Waste is a computer going to a landfill having done actual computations less than 90% of it's life. 90% of the computers powered on right now are idle or powered off; what a waste! [/B]
Is it a coincidence that your wifes pc is called Uranus?
 
			
			All right, I'll give it a try within a month more or less.
Wanna see what he can do. Couldn't go over 3410Mhz with my vapo, so wanted to see 3.5G at least...
Intel Core 2 Quad Q6600
GSkill F2-8000CL DDR2-1000 2x2GB
Abit IP35 Pro
XFX NVidia GeForce 6800GT @ 435/1210Mhz
2x WD Raptor 36GB RAID 0
Antec TruePower Quattro 1000w
Windows Vista Ultimate x64
So everyone says the CAB2E's Cold bugs are bad, but how bad and is this consistent enough to generalize? I guess once I get my single stage up and running I'll see what mine does...
Heatware | Ebay:Crazymullen | If you are unsure what Fhqwhgads means You are REQUIRED to go HERE| Powered by Centon Ram
IMHO Waste is a computer going to a landfill having done actual computations less than 90% of it's life. 90% of the computers powered on right now are idle or powered off; what a waste! [/B]
Is it a coincidence that your wifes pc is called Uranus?
 
			
			Well then can {e.g. stephen} post a sticky with the list ?Originally Posted by biohead
Yeah that would be really nice, i am attempting to get enough info together on the bug so that I can post some general rules and/or expectations based on stepping (if it is stepping based) so that people will know, I just need to do some more research so that I know the information is accurate.
Heatware | Ebay:Crazymullen | If you are unsure what Fhqwhgads means You are REQUIRED to go HERE| Powered by Centon Ram
IMHO Waste is a computer going to a landfill having done actual computations less than 90% of it's life. 90% of the computers powered on right now are idle or powered off; what a waste! [/B]
Is it a coincidence that your wifes pc is called Uranus?
 
			
			From another thread about FX-57s, Dumo says that his info most likely applies to all San Diego cores:
http://www.xtremesystems.org/forums/...0&postcount=42
Nothing newer than week 0533 though.
thanks that helps I'll add that in as well. MORE RESULTS WELOME!!!! Thanks to the guys that have posted so far, its been really helpful.
Heatware | Ebay:Crazymullen | If you are unsure what Fhqwhgads means You are REQUIRED to go HERE| Powered by Centon Ram
IMHO Waste is a computer going to a landfill having done actual computations less than 90% of it's life. 90% of the computers powered on right now are idle or powered off; what a waste! [/B]
Is it a coincidence that your wifes pc is called Uranus?
 
			
			i plan 2 go phase any 0543's?
 
			
			You have to narrow the temp.range on cpu core.....single stage around -20C to -15C or probly -50C evaporator temp.
Cascade will yield -50 to -68 cpu core temp.
Dry ice temp. range from -30 to -45C.
Most San Diegos will run ok with single stage/dry ice @ high htt, but it will stuck probly around 240 htt with cascade.
Venus/opteron still a mystery with cascade, but for my 150 cabne0528 theres no problem with cld bug @-94C evap. or -50/60ish cpu core temp. Probly the memory controller was set differently...
Ricky's tweak or ACPI Multiprocessor tweak will help tame the cold bug in most SD/Venus, but it will put a tremendous heat load to your cooling. Especially with high vcore.
 
			
			CPU Name: Athlon 64 3700+
Core: San Diego
Stepping: CABGE
Week: 0515 SPMW
Bugged?: NO
Symptoms: N/A
Die temp at which bug occurs: N/A
Evap temp: -60
Lowest Tested fully working and stable temp: -34
CPU Name: Opteron 146
Core: Venus
Stepping: CABNE
Week: 0530 APMW
Bugged?: NO
Symptoms: N/A
Die temp at which bug occurs: N/A
Evap temp: -60
Lowest Tested fully working and stable temp: -30
CPU Name: Opteron 146
Core: Venus
Stepping: CABYE
Week: 0543 FPMW
Bugged?: NO
Symptoms: N/A
Die temp at which bug occurs: N/A
Evap temp: -60
Lowest Tested fully working and stable temp: -29
CPU Name: Opteron 144
Core: Venus
Stepping: CAB2E
Week: 0540 FPMW
Bugged?: YES
Symptoms: No boot above 230 HTT on any volts. (N.B. I did not try very hard to get a boot on this chip is it was only a mediocre clocker on air. Therefore I've not found at what temp the bug occurs unfortuntely)
Die temp at which bug occurs: N/A
Evap temp: -60
Lowest Tested fully working and stable temp: N/A

|Opteron 146 - 3.4Ghz|Mushkin Redlines - 243mhz 2/2/2/5|X1900XT-X|
|3D Mark:| 01 - 43,317 | 03 - 22,241|05 - 14,360|06 - 6,304|
|Super Pi:| 1M 25.188s| 8M 4m 33.781s|32M 22m 22.516s|
|Modded Mach II GT cooled|
 
			
			do u kno if all 0543's are the same?Originally Posted by Kesnel
 
			
			I couldn't really say unfortunately. I've only owned the one 0543 chip and I can't recall seeing anything else about how they handle the cold.Originally Posted by Rayman
Here's hoping that yours is a good one though.

|Opteron 146 - 3.4Ghz|Mushkin Redlines - 243mhz 2/2/2/5|X1900XT-X|
|3D Mark:| 01 - 43,317 | 03 - 22,241|05 - 14,360|06 - 6,304|
|Super Pi:| 1M 25.188s| 8M 4m 33.781s|32M 22m 22.516s|
|Modded Mach II GT cooled|
 
			
			thanx just gotta figure out how to fit phase on my sli setup lol
I've seen a few -0543's on here under some type of phase, but finding info on this stuff is like trying to find a file at the IRS....
Heatware | Ebay:Crazymullen | If you are unsure what Fhqwhgads means You are REQUIRED to go HERE| Powered by Centon Ram
IMHO Waste is a computer going to a landfill having done actual computations less than 90% of it's life. 90% of the computers powered on right now are idle or powered off; what a waste! [/B]
Is it a coincidence that your wifes pc is called Uranus?
CPU Name: Opteron 148
Core: Venus
Stepping: CAB2E
Week: 0546 BPMW
Batch#:50141
Bugged?: yes
Symptoms: No post
Die temp at which bug occurs: -35 c
Evap temp (Dry Ice): -45 c
Lowest Tested fully working and stable temp: -4C
OC:Cpuz220139 Cpuz259146
#1.*DFI-VENUS*Opteron-185*XP-Pro*OCZ600SLI*2x1024KingstonHX*Audigy2zs*8800GTS@6 80/1030*|CustomChilled|
#2.*DFI-ULTRA-D*Opteron-180*Vista-Ult*GeilOne-S-2x512*OCZ600SLI*74gbRaptorx2*Audigy2zs*7900GT*Lian LiHtpc*
[SIGPIC][/SIGPIC]
 
			
			CPU Name: Opteron 148
Core: Venus
Stepping: CAB2E
Week: 0546 PPMW
Bugged?: yes
Symptoms: No boot
Die temp at which bug occurs: -35 c
Evap temp: -45 c
Lowest Tested fully working and stable temp: Not sure, it will not boot at any setting under single stage. No way of telling what temp the cold bug kicks in.
MB Reviewer for HWC
Team OCX Bench Team
 
			
			Hi Guys...
The KAB3E and KAB2E are Bugged ?!
Are there differences from the E4 to the E6 Stepping?
Search urgently 3700+ without the Cold nose, but is probably impossible......??!
 
			
			OK, just tried Dry Ice on this babe, and...Originally Posted by PoL

CPU Name: Athlon 64 3700+
Core: San Diego
Stepping: CABGE
Week: 0515 SPMW
Bugged?: Yes
Symptoms: Won't go further than 270Mhz
Die temp at which bug occurs: -34º
Evap temp (DICE): -72° (Vapochill)
Lowest Tested fully working and stable temp: -29°
Intel Core 2 Quad Q6600
GSkill F2-8000CL DDR2-1000 2x2GB
Abit IP35 Pro
XFX NVidia GeForce 6800GT @ 435/1210Mhz
2x WD Raptor 36GB RAID 0
Antec TruePower Quattro 1000w
Windows Vista Ultimate x64
 
			
			Originally Posted by Dumo
How high can you go on divider 9?
Opteron 165 @ 3133 MHz dual prime stable * DFI Venus * 2x512 BH-5 UTT * XFX 6600 GT * Silverstone ZEUS 560 W *
 
			
			I would like an answer on that question tooOriginally Posted by Dogimann
I think both the KAB2E, and the KAB3E are hardly bugged
P5B Deluxe Wifi | E6400 L629B (4GHz@water) | Corsiar Twinx 8500 | 7900GT 520M | 2,1TB HDD | [Homemade watercooling] [Overklokk built SS Phase Change]
Core 2 Duo 4GHz Club!
 
			
			 
 
				Hi Guys
Ar the Opteron 165 CCB1E 0605XPMW Buged?!
THX
 
			
			VERY bugged unfortunately.
So much so that even some water setups in airconditioned rooms are bugging them.
Last edited by Vapor; 05-09-2006 at 10:02 AM.
 
			
			CCB2E 0620BPMW
FX60
any info at all on this Steppings cold bug and OC ability wud help me greatly
many thanks
Intel i7 950 4GHZ
OCZ Reaper 1600mhz 6-8-6-20
Gigabyte UDR3 X58
2x Nvidia 460 GTX 1GB in SLI
2x OCZ Vertex 2 120GB Raid 0
620w Corsair PSU
Bookmarks