hi guys.. i need help with the vcore of this mobo.. when i set 1.7 on the bios vcore monitor displays ony 1.56-1.61.where is the problem?Is my mobo that had some problems? i can achieve over 370 mhz of fsb without mch mod..
does exist a vcore mod(i can set only up to 1.7)?
P4 550 3.4@4.311 2*256 mushkin pc3200@270 pov fx5900xt 2*37 gb raptor raid 0 toshiba sdm-1812 fortron 400w 30" s.pi 1M
Can you post a picture of the CPU/CPU MOSFET area of the board please. Have you tried checking Vcore using a multimeter? Software readings are almost always inaccurate.
it is very strange.. every time i change the vcore at 1.4 vcore monitor displays a range of values from 1.49 to 1.54 . if i set 1.65-1.7 it displays from 1.52 to 1.61..BUT the strange thing is that after 10-15 minutes from the power up vcore monitor displays the value that were set in the bios. and the tempratures confirm this vcore, infact @1.4 i've got 40° in idle, @1.5 45°, and with 1.65 or more 50+.
P4 550 3.4@4.311 2*256 mushkin pc3200@270 pov fx5900xt 2*37 gb raptor raid 0 toshiba sdm-1812 fortron 400w 30" s.pi 1M
You should be able to check the true Vcore at any of the points I've marked. If you get a lot of voltage fluctuation/Vdroop on your multimeter using those points, I'll help you look for a mod to help stop it
A friend of mine also has droop problems with the P5WD2 .
i check tomorrow the voltages at the point that are marked.Originally Posted by Stelios
the main problem is that when i change the vcore settings from bios and i reboot , voltages are totally unwrapped... after 10-15 minutes they become "normally"
P4 550 3.4@4.311 2*256 mushkin pc3200@270 pov fx5900xt 2*37 gb raptor raid 0 toshiba sdm-1812 fortron 400w 30" s.pi 1M
I think you should RMA your board
does someone have a link for the vcore mod ?
did you send a mobo to asus rma? how many time you wait to receive the mobo?I think you should RMA your board
does someone have a link for the vcore mod ?
P4 550 3.4@4.311 2*256 mushkin pc3200@270 pov fx5900xt 2*37 gb raptor raid 0 toshiba sdm-1812 fortron 400w 30" s.pi 1M
I didn't send anything, but yours seems defective
i put on another bios version and i haven't got the problem in changing vcore.
voltages drops of 0.05(real vcore). and if i set 1.6 in the bios it drops from 1.61 to 1.67-68. if i set 1.40 it dispalys 1.45.
P4 550 3.4@4.311 2*256 mushkin pc3200@270 pov fx5900xt 2*37 gb raptor raid 0 toshiba sdm-1812 fortron 400w 30" s.pi 1M
does vdrop and vcore come from an IC? i've got grabbers, and if were possible to use them is better
P4 550 3.4@4.311 2*256 mushkin pc3200@270 pov fx5900xt 2*37 gb raptor raid 0 toshiba sdm-1812 fortron 400w 30" s.pi 1M
Yep, but I doubt that there isn´t available grabbers that are small enough...
Did anyone saved the pictures? The links don't work anymore.
I need the droop mod
Yeah, I'm keen to give this a go now, the links don't show anything... am I too late...Did anyone saved the pictures? The links don't work anymore.
I need the droop mod
Signature? are you kidding? with new stuff coming out every day, why bother ?
Too bad, had to cancel my planned OC-session with my P4 670 and LN2, because I have no mods on my P5WD2.
m2! I need the p5wd2 vdrop mod...
stilt can you post the guides again?
yeah...would be nice if some1 uploads the pics once again.
Can someone post the whole p5wd2 mods?
I mean the vdd and the mch mods!
i have them at the computer in my job. I will post them tomorrow
The Stilt sent me a new link for all the mods: http://www.elektroni.fi/Stilt/P5WD2-Mods/
great.... thx m8.
now i only need to get all the stuff for the mods :>
edit: just finished all soldering works.
some are realy difficult ...but finally i made it.
now i hopefully dont burn anything ^^
Last edited by Raiden Zero; 01-08-2006 at 02:20 PM.
Hey, great stuff ! - cold ice.
Signature? are you kidding? with new stuff coming out every day, why bother ?
Which one is difficult? Made the Vdroop and VCore in some minutes, both are easy as hell. The others don't seem to be difficult either.
Posting Permissions
Reply With Quote
Bookmarks