uh, (Goofly)I hope you didnt just Fu*K up his board. Svenn, you do NOT solder it from resistor to ground. You solder it from Resistor to the LEG of the mosfet...If you have the picture look at it and solder it to the leg thats indicated. If it helps any, I used a 100 ohm Pot(removed resistor) and I was barely able to change the vdimm with 100 ohm. I recommend 200 ohm at least. I ended up just soldering (2) 47 ohm resisters in series with the pot. I can't really take any pictures that would be useful, as my hot glue is sorta covering the solder job to secure things up. Again, not to ground, to mosfet!