Another thing about this 148 cacje... it doesn`t play nice with a 10x multi
Also I am finding the voltages on the DFI are all over the place when using the +VID.
Another thing about this 148 cacje... it doesn`t play nice with a 10x multi
Also I am finding the voltages on the DFI are all over the place when using the +VID.
Asus P5B-D Wifi (910)
C2D 6300-3.1 1.3v
Corsair PC6400 5-5-5-15 2.1V
GF 7950
Rosewell 550w
Kidz boxx:
DFI LP nF4 Ultra-D(6-23-2)
OPT 148-2.8 1.39v
Gskill HX (2x1g) 2-3-2-5 2.7v
Antec SP2 500
XFX 7800GT
sli-dr, i'll try the 603 bios.Originally Posted by Aerosupra
In short, both AMD and NVIDIA discovered that their next-generation graphics cards are superior to each others' last-generation graphics cards.
Most of the reports I've seen from folks who removed their IHS show some worthwhile gains from the reduction in load-temp. Have you tried higher than 1.525? Seems like you have a bit more cooling headroom if those are load temps.@scottk:
0543 FPMW here too, runnin 3ghz prime at around 1,45 but nothin more, like you said. 3040 not stable with 1,525v
got 34° or 35 ° on my expert. Should i take off IHS ?
Last edited by scottk; 12-30-2005 at 01:09 PM.
max async to 9, read preamble to 16 and im a happy camper
In short, both AMD and NVIDIA discovered that their next-generation graphics cards are superior to each others' last-generation graphics cards.
Try:max async to 9, read preamble to 16 and im a happy camper
MAL 9 - RP 7.5,
Mal 9 - RP 7
Mal 8 - RP 6
Mal 8 - RP 5.5
tRFC:12 instead of 14
Also play with TREF, Drive Strength and Data Drive Strength.
Bios: http://xtremesystems.org/forums/show...0&page=1&pp=25
Last edited by Monge; 12-30-2005 at 02:33 PM.
Just trying to get a CABYE , in my location its extremely difficult to find one, cuz CACJE came in stock everywhere
Does the CABYE 0540FPMW have a ticket to the 3GHz club ???? on water .....
Yeah I can OCCT, and 32M all day long on my CABYE 0540FPMW at 3ghz 1.55v on a freezer 64
Q6700
MSI P35
8GB OCZ
2xHD 2900 XT
PCP&C 1kw
RP 16? And what is ur max now?max async to 9, read preamble to 16 and im a happy camper
PC : Asrock Z68 Extreme3 Gen3 + Intel Core i5 i2500k + 2 x Asus HD6870 DirectCU + 2x2GB PC12800 G.Skill Eco 7-8-7-24 + Creative X-Fi Titanium PCIe + Scythe Mugen 3.
Digicam : Pentax *istDL2 + Pentax smc DA 18-55mm F3.5-5.6 AL + Cosina F3.5/100mm Makro.
Heimkino : Samsung LE-46B450 FullHD + Arion AF-4000HDCI + Onkyo TX-SR505E + Quadral Quintas 5.0 + Heco Victa 25A.
Hi Guys,
Im new here as a member but have been reading ALL these pages for a few weeks now
You guys rock with some of your clocks...im very impressed..
My opty seems prime stable at 2.87 but im sure i can get more as im using a 166 ram divider...
Im sure ill be asking alot of questions shortly so i wont bother today...
Just wanted to say ' WOOT' im in the opty club
time to keep on tweaking
Ive put a screenie in attachment for your eyes to look over... Please tell me if you spot something wrong as there is probably lots... Never really been into OC'g until NOW so i need to understand cas tras etc etc....
Last edited by fraggy; 12-31-2005 at 08:43 AM.
DFI NF4 Sli D
Opty 146 @ 2.87 1.5vt CABNE 0545BPMW
2x512mb Geil one 1t timings
256 7800GTX @ 516/1.4ghz
Hiper 580 type r psu
Custom Built 1/2od WC setup
3d Aurora chassis ( Modded )
Welcome to XS fraggy!!!
Almost 24sec 1m !!and a 22min 11sec 32m
with my H2O cooler.
8 hrs Prime @ 4500 (9x500) DDR-1200
9.59 32m Pi @ 4810 (8.5x566)
9.59 32m Pi @ 4gb DDR 1248
700 Club @ 7 x 585 CPU-Z Val
Prime @ 542 x 7 (4 hrs 1.28v)
32m 5006 (9.48)
OC Formula 3770k-dl G.Skill 2666 C10 Galaxy 660Ti 3gb Apogee HD PlextorM5P xfx p850
MVF 3770k Team 2600 C10 xfx 7850 2gb xspc RayStorm HyperX 3k Hyper 730
Gigabyte EP45-UD3P e8500 Crucial 8500 khx9600 evga 9800gtx PCP&C 610 H20 by Coop
Nice one coop!
Now i will see the 24.xxx! I can't get it .. can run 3200 1,55 but anything more not...
PC : Asrock Z68 Extreme3 Gen3 + Intel Core i5 i2500k + 2 x Asus HD6870 DirectCU + 2x2GB PC12800 G.Skill Eco 7-8-7-24 + Creative X-Fi Titanium PCIe + Scythe Mugen 3.
Digicam : Pentax *istDL2 + Pentax smc DA 18-55mm F3.5-5.6 AL + Cosina F3.5/100mm Makro.
Heimkino : Samsung LE-46B450 FullHD + Arion AF-4000HDCI + Onkyo TX-SR505E + Quadral Quintas 5.0 + Heco Victa 25A.
Got my Opty 148 from New Egg out of New Jersey.
Check out the awsome packing job.
Luckily it still runs @2.9ghz with an FX-55 hsf and 1.525v.
I'm going to try and send these photo's to AMD so they can see how flimsy that crap is.
Asus P5N-T Deluxe (JUNK)
EVGA 8800GTX
Core 2 Duo E6600
4 gig Gskill 6400PHU2-2GBHZ
Creative X-fi gamer
Corsair HX620 power supply
LOL !!! I've read about things like that before, somebody ordered an FX-57 off eBay and their green cardboard carton was all beat up! I bet somebody dropped it or something.
Asus Rampage II Gene | Core i7 920 | 6*2GB Mushkin 998729 | BFG GTX280 OCX | Auzentech X-Fi Forte | Corsair VX550
—Life is too short to be bound by the moral, ethical and legal constraints imposed on us by modern day society.
Dropped it? I think someone played soccer with it.
Asus P5N-T Deluxe (JUNK)
EVGA 8800GTX
Core 2 Duo E6600
4 gig Gskill 6400PHU2-2GBHZ
Creative X-fi gamer
Corsair HX620 power supply
Hmm I just noticed, I have a 146 sitting here with the same stepping as you, CAB2E 0546FPAW. I was hoping for 3GHz, but then again I do have some better cooling, and I have another 146 on the way from NCIX because they had some earlier steppings. I will sell the one I dont want
Asus Rampage II Gene | Core i7 920 | 6*2GB Mushkin 998729 | BFG GTX280 OCX | Auzentech X-Fi Forte | Corsair VX550
—Life is too short to be bound by the moral, ethical and legal constraints imposed on us by modern day society.
Not sure I want to push it much further. Gets up around 50c already and I'm not sure what a "safe" max voltage is.
Asus P5N-T Deluxe (JUNK)
EVGA 8800GTX
Core 2 Duo E6600
4 gig Gskill 6400PHU2-2GBHZ
Creative X-fi gamer
Corsair HX620 power supply
Single core, 1.6v should be ok, but yeah if you are already getting up to 50c then you should get some better cooling.
Asus Rampage II Gene | Core i7 920 | 6*2GB Mushkin 998729 | BFG GTX280 OCX | Auzentech X-Fi Forte | Corsair VX550
—Life is too short to be bound by the moral, ethical and legal constraints imposed on us by modern day society.
For someone asked for CACJE, here is one.
Opteron 144 CACJE 0546APBW
@Stock VCore
<a href="http://imageshack.us"><img src="http://img414.imageshack.us/img414/1544/2727smallfft8hrs21rj.jpg" border="0" width="1600" alt="Image Hosted by ImageShack.us" /></a>
@1.2VCore
<a href="http://imageshack.us"><img src="http://img414.imageshack.us/img414/7097/270x9smallfft12hrs17mk.jpg" border="0" width="1600" alt="Image Hosted by ImageShack.us" /></a>
Currently working on 2880MHz @1.5VCore. 3GHz is definitely a no-go with air-cooling, however.
BTW, how low can you go with VCore? Say, with 2.8~3.0VDIMM?
27" iMac
3.06GHz Core 2 Duo
8GB DDR3
1TB HDD + 2TB Ext + 1TB Ext
ATI HD 4670 256MB
20" iMac
2.4GHz Core 2 Duo
2GB+1GB G.Skill DDR2
320GB HDD
ATI HD 2600 Pro 256MB
16GB iPhone 3GS
GamerTag: ugp
GamerTag: SadisticPuppets
I am in need of some dire help with my Opty. I can't get any overclock at all to Prime what so ever...everything fails within 1 minute of Prime. I mean everything. I have tried all kinds of voltage at 300x10.0 there is. It is OCCT stable at v1.475. I don't understand this. Can something runnning in the background cause Prime not to run properly...? I am of lose of ideas with this.
Last edited by ugp; 12-31-2005 at 10:18 PM.
27" iMac
3.06GHz Core 2 Duo
8GB DDR3
1TB HDD + 2TB Ext + 1TB Ext
ATI HD 4670 256MB
20" iMac
2.4GHz Core 2 Duo
2GB+1GB G.Skill DDR2
320GB HDD
ATI HD 2600 Pro 256MB
16GB iPhone 3GS
GamerTag: ugp
GamerTag: SadisticPuppets
WTF how can it end up like thatGot my Opty 148 from New Egg out of New Jersey.
Check out the awsome packing job.
Luckily it still runs @2.9ghz with an FX-55 hsf and 1.525v.
I'm going to try and send these photo's to AMD so they can see how flimsy that crap is.
---
It looks like someone took a mixer from the kitchen and mixed it up.
Maybe someone tried a bit of torture BEFORE it was in a mobo for a changeWTF how can it end up like that
lots and lots of cores and lots and lots of tuners,HTPC's boards,cases,HDD's,vga's,DDR1&2&3 etc etc all powered by Corsair PSU's
opteron + DI
Last edited by coop; 01-01-2006 at 07:21 PM.
8 hrs Prime @ 4500 (9x500) DDR-1200
9.59 32m Pi @ 4810 (8.5x566)
9.59 32m Pi @ 4gb DDR 1248
700 Club @ 7 x 585 CPU-Z Val
Prime @ 542 x 7 (4 hrs 1.28v)
32m 5006 (9.48)
OC Formula 3770k-dl G.Skill 2666 C10 Galaxy 660Ti 3gb Apogee HD PlextorM5P xfx p850
MVF 3770k Team 2600 C10 xfx 7850 2gb xspc RayStorm HyperX 3k Hyper 730
Gigabyte EP45-UD3P e8500 Crucial 8500 khx9600 evga 9800gtx PCP&C 610 H20 by Coop
Posting Permissions
Reply With Quote
Bookmarks