X1300 Vgpu Mod!!

[saaya]

I wonder how far this thing could be pushed.... it's arleady past Pro Stock Speeds


And 3x more heat

nah, non pros are 15W and 1600pros are 35W or so... afaik

to bassv2: i hope to get 700-750mhz from gpu on 1.45/1.5V and with x1300pro card after vmod should be much better!!

to saaya: power reg. on x1600 is same as on my x1300 (rt9232a) so vmod will be easy if you can solder so small resistors 1.0mm x 0.5mm
what MB you want to use for xfire setup??

i hope i can use the mod on my cards! right, you have a sapphire card as well! perfect!

i hope i can get 750 on my 1600s! ^^
i dont know if i can solder that well, lets find out
and atm i have a crossfire board from ati for a crossfire review, and next week i wanna buy the asus a8r-mvop, only 100€ and its very fast i heard.

[Lightman]

i hope i can get 750 on my 1600s! ^^
i dont know if i can solder that well, lets find out
and atm i have a crossfire board from ati for a crossfire review, and next week i wanna buy the asus a8r-mvop, only 100€ and its very fast i heard.[/QUOTE]


It's more than certain that you will get 750mhz from x1600
i want asus too but is unavailable in UK for now, mayby after new year
now i'm looking for some good pictures of my card over internet, because my camera will come wednesday and i can't show you where to solder

Mayby someone will send pictures of x1300 back side in macro mode??

[bassv2]

Lightman,
what cooling are you usiung?? Do you have any idea what the temps are?

[Lightman]

Lightman,
what cooling are you usiung?? Do you have any idea what the temps are?

passive!! it's enough for now!!
http://www.quietpc.com/uk/vgamb.php#zm80dhp
i install fan on it but with no effect on max clock of gpu

ad2. temps are quite normal, i can hold radiator in hand without problems it's only warm. i think gpu is around 60C

[bassv2]

passive!! it's enough for now!!
http://www.quietpc.com/uk/vgamb.php#zm80dhp
i install fan on it but with no effect on max clock of gpu

ad2. temps are quite normal, i can hold radiator in hand without problems it's only warm. i think gpu is around 60C

AFter Market Cooling!!!

I have the sapphire passive heatsink. I'm going to place an aMD 64 3000+ Stock Heatsink's fan about 1 feet away from it. I hope it's going to help temps before I oc :P

[saaya]

AFter Market Cooling!!!

I have the sapphire passive heatsink. I'm going to place an aMD 64 3000+ Stock Heatsink's fan about 1 feet away from it. I hope it's going to help temps before I oc :P

well how hot does the heatsink get?
and how hot are the reported temps in the driver?
or doesnt it report temps?

[bassv2]

well how hot does the heatsink get?
and how hot are the reported temps in the driver?
or doesnt it report temps?

X1300 Non-Pro dosn't have temperature sensors
I did a small OC, 500/300, and after load for about 20minutes, it was just warm... the room temp is around 10C. Being lowend, I don't think it's that hot, but when I oc more, I don't wanna take risks with no temp sensor.
I have the sapphire edition which is a black passive heatsink.