Another Opteron Shuttle @ 3.3G.... AIR

[shuRe]

Spec:
Opty 146 cab2e 0540 FPMW
Shuttle NF4 board
1x 1gb Ballistix
Connect3d GTO
80gb Hitachi Deskstar NCQ thingy
350W Shuttle PSU


Constants in the test:
vDimm 2.8 bios (2.75 real)
vChipset 1.6
HTT speed x3
Ram @ 3-3-3-8 1T
Connect3d @ stock GTO timings w/ 16 pipelines
Ambient air @ 18C
Fans @ 100% (full power)
Arctic Ceramique used
Same windows XP Pro (NON TWEAKED)


The Rig:




Prime 9h stable @ 2800, stock volts:
(real CPU temp was 45C, XPC tools errored when i opened CPU earlier




SuperPI 32mb + OCCT stable 2800, 1:1, stock volts:




SuperPI 32mb w/ Ram @ 241, 2.5-2-2-8:




Suicide Shot @ 3.3G, vCore @ 1.7 bios, 1.67 real:





Wasnt the most strict overclocking, but got the results i wanted without the fuss of worring about a few mhz here and there. If i had taken the case off i might have got 20-50 more mhz are SS, but i wasnt that worried

[Celcius]

Very Nice!

[dave_graham]

wow!

[SoF]

hey that's a sweet shuttle
I like thoose little rockets.
will put in my 3200+ venice in a shuttle - see what it can do on air, never checked it so far
nice oc

[shuRe]

hey that's a sweet shuttle
I like thoose little rockets.
will put in my 3200+ venice in a shuttle - see what it can do on air, never checked it so far
nice oc

yeh they are surpisingly good, v nice idle temps @ 1.4 2800 (19-22C)

However the bios is rather poor, only allowing up to 300htt, 1.7vcore, and about 6 memory timings

Also i have to keep unplugging, then plugging in my razer copperhead after i enter the bios each time

Other than that they are well worth getting if you want as gooder overclock with mobility

[mrlobber]

Take that cpu out for benching It needs to see the true landscape, including some subzero temps

[Dissolved]

thats an awesome frag box.

if you can get 2.8ghz 3d stable for gameing, that would rock.

I had a nf2 shuttle with a xp1700@2.6ghz, 9800xt, dual 200gb hdds.. was an awesome box.

[SoF]

yeh they are surpisingly good, v nice idle temps @ 1.4 2800 (19-22C)

However the bios is rather poor, only allowing up to 300htt, 1.7vcore, and about 6 memory timings

Also i have to keep unplugging, then plugging in my razer copperhead after i enter the bios each time

Other than that they are well worth getting if you want as gooder overclock with mobility

thanks for the infos on oc features of the bios.
if I'm correct I ordered a shuttle with a similar board as yours
will give it 1.45V and hope to get 2.7-2.8GHZ stable...not a clock where I'm normally at but it is a shuttle...your one is really outstanding, specially the ss rockz
it is not for me just building it for fun for a business partner -.-

regards

[shuRe]

Take that cpu out for benching It needs to see the true landscape, including some subzero temps

unfortunatly i havnt got the $ or time to fund a good benching rig, and i personally dont warm to just getting high results without 24/7 stability and usage.

thats an awesome frag box.

if you can get 2.8ghz 3d stable for gameing, that would rock.

I had a nf2 shuttle with a xp1700@2.6ghz, 9800xt, dual 200gb hdds.. was an awesome box.

I forgot to screenshot my 3dmark05 results at 2.8 stock votls, 1:1 w 280 3-3-3-8 2.8vdimm; so here you are:



and also:


such a sick mouse, but it really is like a car, you have to be a good driver to get the most out of it.

[Fr3ak]

Very nice result
I am still happy with my little Shuttle. I was going to watercool the Cpu in when I got it. But the Shuttle heatpipe turend out to be very good.

[AndrewZorn]

1.7v, air cooling?

[shuRe]

1.7v, air cooling?

yes, only for a short period, i think idle temps were about 65C