Any GTO/GTO2 > 16 pipelines results yet?

**jackea** · 12-03-2005, 07:56 AM

Originally Posted by Millyons

unfortunatly No................

LOL i started this thread and drulled over c3d and gto2 forever, since i couldnt get them in my country. Now when finaly got ahold of them i found out they cant be modded anymore.........i have them comming from distributer in hungary that got them in stock last monday they must be the same batch as those 50 unlockable

just my luck

The Sapphire GTO2 should be unlockable, so far i have not heard
of one that can't be unlocked.

**Heretic** · 12-03-2005, 09:12 AM

I'm also interested if those 50 were all C3D r423 and/or 2ns parts...

**daysleeper** · 12-03-2005, 02:17 PM

my best scores so far => mark05...mark01

**NickS** · 12-03-2005, 04:15 PM

Originally Posted by Heretic

I'm also interested if those 50 were all C3D r423 and/or 2ns parts...

ye, sadly, they are.

**rookiekiller** · 12-04-2005, 04:28 AM

which bios is best for sapphire gto2?

i use stock 16p, but it clocks not so good, i cant get stable >600, and it's not loopstable in 01mark, get freezed after 3-4 hours

**blind_ripper** · 12-04-2005, 04:43 AM

use TIN TIN bios its little bit beter i think http://simon.webideal.ca/X800GTO2/TinTin.bin
or this bios
http://simon.webideal.ca/X800GTO2/sx850pe.bin

**blind_ripper** · 12-04-2005, 05:08 AM

it seems thate a X800GTOÂ² can handel more VGPU thane a X850
http://i3.photobucket.com/albums/y90...ipper/vGPU.jpg
1.838VGPU

max VGPU without ovp , it gone come on water aimin 700mhz core

.
so far on air 1.79VGPU have 657mhz core 3D stabel and 645mhz withe memtweak

.
happy banching

**daysleeper** · 12-05-2005, 11:02 AM

Originally Posted by blind_ripper

it seems thate a X800GTOÂ² can handel more VGPU thane a X850
http://i3.photobucket.com/albums/y90...ipper/vGPU.jpg
1.838VGPU

max VGPU without ovp , it gone come on water aimin 700mhz core

.
so far on air 1.79VGPU have 657mhz core 3D stabel and 645mhz withe memtweak

.
happy banching

Is water in roomtemperature or colder?.That's quite high voltage

**blind_ripper** · 12-05-2005, 12:17 PM

watertemps dont know the room temps where round 10Â°c Ã:banana: 7Â°c .
thx next week or so il heb DD maze4 and the card wil go on chiller later on

**KoHaN69** · 12-05-2005, 01:33 PM

Originally Posted by Millyons

unfortunatly No................

LOL i started this thread and drulled over c3d and gto2 forever, since i couldnt get them in my country. Now when finaly got ahold of them i found out they cant be modded anymore.........i have them comming from distributer in hungary that got them in stock last monday they must be the same batch as those 50 unlockable

just my luck

Are you sure?

http://www.xtremesystems.org/forums/...&postcount=541

Try it with that, eh?

**Millyons** · 12-05-2005, 01:48 PM

im almost sure, seems that all newer cards are unlockable, LOL man u got my hopes up, but if the Fs don't match there is no help, LOL im trying to tell myself that when they get here they wont be able to mod (witch they 99% wont be) so im not so disapointed, there is still a flicker of hope in me that i got to suppres withnin next couple days LOL, i guess ill just got to spend more money and get a 7800GT

**Pt1t** · 12-06-2005, 09:24 AM

My gto² under watercooling... I m going to test it with more vgpu ,
vdd mod and cold water ..

But for this test :

VGPU 1.7v
VDD Stock
Watercooling water ~ 22° GPU + CPU

http://service.futuremark.com/compare?3dm05=1526326

**blind_ripper** · 12-06-2005, 09:51 AM

nice score pt1t check my score a kopple of post back , whates ur name on tn ? il get u in a week or so

**aaron_sue** · 12-07-2005, 04:15 AM

does anyone know how to change the vivo on the c3d to pal from ntsc?

**wampir** · 12-07-2005, 04:42 AM

How much volts did You put on gpu with zalman vf700cu ??

**blind_ripper** · 12-07-2005, 04:50 AM

1.79vgpu withe zalman vf700alcu

**wampir** · 12-07-2005, 04:56 AM

1.79vgpu withe zalman vf700alcu :O
with the Open windows cooling IMO

**BlackPearl** · 12-07-2005, 06:30 AM

Originally Posted by aaron_sue

does anyone know how to change the vivo on the c3d to pal from ntsc?

There should be a DIP switch near the fan connector.

**coolmonk** · 12-07-2005, 08:50 AM

I've read the instructions for vmodding X850 cards. I only want to perform a vgpu mod to roughly 1.4-1.5v depending on the overclock. I'm currently sitting at 594/621 but want to run at least 610 on the core. Does anyone have a completed picture of how a modded vgpu X800GTOÂ² looks like? I understand your image won't be 1.4-1.5v....but I just want to see a picture before proceeding with the mod.

**K.I.T.T.** · 12-07-2005, 09:03 AM

My GTO2

**Pt1t** · 12-07-2005, 09:25 AM

Originally Posted by Pt1t

My gtoÂ² under watercooling... I m going to test it with more vgpu ,
vdd mod and cold water ..

But for this test :

VGPU 1.7v
VDD Stock
Watercooling water ~ 22Â° GPU + CPU

http://service.futuremark.com/compare?3dm05=1526326

My card :p

**blind_ripper** · 12-07-2005, 10:48 AM

very nice , heres my
http://i3.photobucket.com/albums/y90...topsetupx2.jpg
http://i3.photobucket.com/albums/y90...2setupfull.jpg

**Millyons** · 12-07-2005, 05:00 PM

well just like i thaught got my 2 connect3d cards today and they are both unlockable

**szukalski** · 12-07-2005, 06:13 PM

Originally Posted by Millyons

well just like i thaught got my 2 connect3d cards today and they are both unlockable

You used flashrom16p? The standard flashrom app won't do it.

It's a major bummer if the new cards are unlockable

**KingYubbo** · 12-07-2005, 07:13 PM

This is on Nintek in Australia:

http://www.nintek.com.au/x/scripts/p...idproduct=4326

Any of you had these before?

(Powercolor X800GTO 16 Pipes)

Thread: Any GTO/GTO2 > 16 pipelines results yet?

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions