This is mby something Spaiky mentioned few months ago.. a little boost on io voltage and so on
nice that now someone finally did this mod
This is mby something Spaiky mentioned few months ago.. a little boost on io voltage and so on
nice that now someone finally did this mod
sweet
so just by adding some caps you gained 200mhz?
can you tell me what caps exactly i need for all the mods?
amazing george! now i know what you are doing with all those ct479
you are THE man, as I probably said you on couple occasions.
I know that you'll probably mod that p4c800-e some Abit IC-7 style, so it would be a blast if you could share us some of that too .
I know that in IC-7 guide, you mentioned some vcore stabilization mods, that asus really needs, but i don't know if they would be important with adapter combo.
p.s. i am just quessing, is it possible that you solder 3.3v line, directly to that stab mosfet?
Last edited by zbogorgon; 12-06-2005 at 07:13 AM.
OMG finally!!! some ct479 mods!
can u put a nice list up of evrything needed etc?
MUST practice soldering, almost screwed up my other p4c800-e yesterday when vdimm mod went bad
Mine also does around 2.7, so a bump to 2.83 would be
Core 2 Quad Q6600 @ 3GHz . DFI DK P45-T2RS Plus . XFX 9800GT 512MB . 8GB OCZ Blade PC2-9200 . WD6400AAKS AHCI .
Creative X-Fi XtremeMusic . Hanns.G 28" LCD . Thermalright U120-E . Seasonic S12 600w . Windows 7 Professional E Retail x64 .
with LN2 there are 2 possibilities.Originally Posted by moddolicous
1) destroy everything
2) best bench
One thing is for sure, you guys are going to see the MOST xtreme setup for benching if those things hipro5 has in mind take place that day.
(btw ill be sure to bring cameras and lots on SD sticks for the pics )
hope the boards will be here soon
wtg hipro5!!!
if this is your first night in xtremesystems,
you have to overclock.
@STEvil: He was talking about the "ultimate" mod, I'm talking about the simple ones. Seems like they're still fully worth it though.
Do you mean 1uF/6.3v??Originally Posted by hipro5
And what about the lower left circled spot?
So from looking at the pics so far it looks on the top side of the CT479 we need 4x 1uF/6.3v ceramic capacitors and 1x 22uF/10V tantalum cap. Then on the backside, a 100uF/16V and a 47uF/16V tantalum. Just clarifying.
Thanks a lot, kickass work as usual!
found some 100uF/16v caps on my aureal vortex 2, would they be good enough? what about this ESR thing?
Cheers
edit: found some normal 47uF/16v too on my vortex, how much would i gain from soldering the 100uF and 47uF then? (havn't got other parts and seem hard to find in uk)
Last edited by lawrywild; 12-06-2005 at 12:19 PM.
Core 2 Quad Q6600 @ 3GHz . DFI DK P45-T2RS Plus . XFX 9800GT 512MB . 8GB OCZ Blade PC2-9200 . WD6400AAKS AHCI .
Creative X-Fi XtremeMusic . Hanns.G 28" LCD . Thermalright U120-E . Seasonic S12 600w . Windows 7 Professional E Retail x64 .
I wonder if I'll get anything more from my Banias
Ryan
Banias 1.5G SL6F9 @ 1.8G {200*9 @ ~1.59vCore} :: P4C800-E DLX w/ CT479 :: 2x 512M Samsung TCC4 2.5-3-3-6 :: 9800 {380/330}
Pure Genius Hipro
A supercharged adapter .
Hipro man this is really scared :P you are the man! haha 200 mhz is truly great for the couple of cents....
Congrats!!!
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
on the lower left he has the fsb jumpers solderd but it looks like pins 3-2 and 6-5 ?
after looking at a dead ct-479 it looks like a easy mod apart from the 47Uf on the back very small pads to solder too easy to lift one if not carefull.
Originally Posted by Gautam
hi lawry,
you can get the parts from www.rswww.com but some parts are qty order only i just made a list and it was £25 + vat and delivery
you could try www.maplin.co.uk or www.farnell.co.uk
i will take a look later.
i could order and then sell you the parts you need at cost. should be about £5 thats all.
Originally Posted by lawrywild
Thanks M8......Originally Posted by persivore
INTEL PWA FOR EVER
Dr. Who my arss...
.........
Originally Posted by caater
I've tried that too.....No go....I raised the internal 3.3Volts to up to 3.7Volts with no impact at all.....
INTEL PWA FOR EVER
Dr. Who my arss...
.........
Not only the caps but something else also....Originally Posted by saaya
I'll upload tommorow some more photos and details about it...
INTEL PWA FOR EVER
Dr. Who my arss...
.........
No I mean 1uF/63v.....You can use one at over 16Volts though....Originally Posted by Gautam
If you mean lower left of the front of the adapter, they "where" the jumpers for the 133MHz fsb bus
Corect for all....(exept the 6.3Volts)
Last edited by hipro5; 12-06-2005 at 01:08 PM.
INTEL PWA FOR EVER
Dr. Who my arss...
.........
hey hipro5, could you reply to post #32 plz
thx
Core 2 Quad Q6600 @ 3GHz . DFI DK P45-T2RS Plus . XFX 9800GT 512MB . 8GB OCZ Blade PC2-9200 . WD6400AAKS AHCI .
Creative X-Fi XtremeMusic . Hanns.G 28" LCD . Thermalright U120-E . Seasonic S12 600w . Windows 7 Professional E Retail x64 .
Originally Posted by lawrywild
No need to worry about the ESR thing coz we only filter a bit the 12V and 12Volts with the caps, EXCEPT for the tantalum 22uF which filters the "VCore" of the Dothan....Well it's not exactly the VCore of it but let's say it like this so as not to be confused.....
INTEL PWA FOR EVER
Dr. Who my arss...
.........
kool, i'll do mod tomorrow then
Core 2 Quad Q6600 @ 3GHz . DFI DK P45-T2RS Plus . XFX 9800GT 512MB . 8GB OCZ Blade PC2-9200 . WD6400AAKS AHCI .
Creative X-Fi XtremeMusic . Hanns.G 28" LCD . Thermalright U120-E . Seasonic S12 600w . Windows 7 Professional E Retail x64 .
Some UPDATES I forgot to mention........
I tried the "max fsb boot" problem this afternoon.....
BEFORE Mod this DOTHAN 740 could boot up to 238MHz fsb within bios....
AFTER Mods it now boots 277MHz fsb within bios........
INTEL PWA FOR EVER
Dr. Who my arss...
.........
holy sh.. that is awesome! is that 277 just with the "standard" mod or the
ultimate one? if standard, you'll be crowned king by myself and probably a
lot of other dothan / ct-479 users!
i've taken some pictures of one of my adaptors - missed to correct the colors
before taking the pics, so bear with a yellowish tint. hope they are good enough
for you to use. just a blank standard unmodded adapter. paint away on them
in case the direct link thing of imageshack doesnt work again (happens alot to
me)... here's the thumbs to the same pics
sky / s!p - we are oldskool, dammit.
amazing, keep it up
AMD Opteron 146 cabye 0540fpbw @ 3.0ghz 1.5v' DFI nF4 SLI-DR 623-2' 2x512 Redline 4000 ' XFX 7900Gt ' 2xHitachi 80gb Sata II raid0 ' Ocz Powerstream 520w ' Thermalright XP120 w/sx 2 and delta 190cfm
That is a great find Hipro. When i looked at your IC7 mod i was truly amazed on how youVmd that board. Some realy pro stuff there. And now you come up with this Cant wait for the Ultramod i do have a spare adapter............
Abit IC7 P4 2.8a @4.21 | P4 3.4e @4.9 | Gainward 6800GT GS @486/1386
Asus P4P800 SE Dothan 730-PM @ 2900 | EVGA 6800 Ultra GS @521/1376
e8400@4.3G & 8800GTS G92 800/1932/1132 as gaming rig 24/7
Custom self build chillbox with watercooling @-28c 24/7 | chilled wc " cpu -18c idle/-3c load
3DMark 2005 Score Dothan & 6800U
3DMark 2005 Score p4 & 6800GT
HOLY SH**, thats awesome!!!!Originally Posted by hipro5
this with "ultimate" or only what you've shown so far?
MUST MOD ADAPTER....
Core 2 Quad Q6600 @ 3GHz . DFI DK P45-T2RS Plus . XFX 9800GT 512MB . 8GB OCZ Blade PC2-9200 . WD6400AAKS AHCI .
Creative X-Fi XtremeMusic . Hanns.G 28" LCD . Thermalright U120-E . Seasonic S12 600w . Windows 7 Professional E Retail x64 .
hipro you need to be crwoned "thy god" by all - amazing stuff
reckon you can do anything about the 180 ish limits on the b1's?
Bookmarks