It was a murder-suicide. PSU killed itself, took CPU with him. What a shame too as this chip did 3.65Ghz with 1.65v and -5C load temps. I think I may cry. In fact, everybody cry for me.
It was a murder-suicide. PSU killed itself, took CPU with him. What a shame too as this chip did 3.65Ghz with 1.65v and -5C load temps. I think I may cry. In fact, everybody cry for me.
awww...i'm sorry to hear about your loss
That sucks my friend
I won't be able to attend the services but I'll be sure to send flowers.
24/7 Work & Play Rig
Gigabyte X58A-UD5, i7 920 @ 4.56ghz 1.48v 21x217, G.Skill PI 12Gb 8-8-8-24-1T 1.56V @ 1736Mhz
EK Supreme HF P1, Dual EK DCP 4.0 Pumps and EK Res, XSPC RX360 & RX240 w/ 1850rpm GT's
Sapphire HD 4870 1Gb @ 810/1020mhz, 2x Dell 2407, 2x 1Tb WD Black SATA3, 2x 2Tb Hitachi 7k2000
Cooler Master ATCS 840, Corsair 750TX PSU, running OSX 10.6.3 & Win 7 64
omfg that sux
These powersupplies keep on dying on people
PCP&C are no longer on my list, Hipro5's "research" revelead a pretty screwed up mechanism in them too. Well, I guess OCZ and Zippy stay..
In short, both AMD and NVIDIA discovered that their next-generation graphics cards are superior to each others' last-generation graphics cards.
Intel 3930k @ 4.55ghz
Asus Rampage IV Extreme
Intel SSD 520 480gb
AMD Radeon 6990
Corsair AX1200 PSU
your PC & C 510 SLi died and fried out your CPU with it in the process... they are usually pretty top notch... I just $hit canned a Hiper type-R 580 SLI power supply because my system kept restarting for no aparent reason. It got great reviews from like 30 tech sites but terrible from like 4 or 5 and I guess it all depends on the unit you got but im going with a Seasonic S12-600 anyway not going to chance it again even thought the Hiper was the best looking PSU i ever had. oh well
any warranty on that FX-57
warranty, yes, I will send in for RMA but there is no way I will get a 0516 back...
Man sorry to hear that, now I'm scared to death that my PC P&C will kill my FX-57, the fan sure has been getting loud lately....
;_;
for you
hopefully my OCZ PSU stays good for a good long while
A seal walks into a club...
Intel Q6600 @ 3.4ghz
Asus Maximus II Formula
Crucial Ballistix
EVGA GTX 280
Lian Li V2000A
[H]eat
yeah I was torn between the ocz 600 powerstream and the seasonic s-12 but heard some scary reports about OCZ psu users, having blowing up problems or failed torture tests,,,, as long as its working so farOriginally Posted by zenzog
That sucks man
Maybe get in contact with pcp&c and let them search for the error?
That might help all of us.
I think they are interested in it when you tell them. You're not a nobody and they have a much better support than DFI.
Opteron 144
DFI nf4
2x256MB Kingston HyperX3000 BH5
Antec TrueBlue480 w 120mm fan and modded rails
I'll be getting info on your replacement cpu soonZippy all the way
I really like my Enermax 660... It's a monster too, about 1 1/2 inches longer than the PCP&C 510, and a lot heavier (especially considering the Enermax case is Aluminum vs. PCP&C that is metal).
If you need higher end for cheap, you may want to try this... runs my new rig great! (see sig).
Barton 2500+@2.7Ghz Air, NF7S v2, 1Gb OCZ 3500GX
9700Pro, PCP&C 510 - Old School Box - Now the GFs
New PC:
Opty 170 0543TPMW @ 2.73Ghz 1.55V, tT BT, Asus A8N32-SLI, 2x EVGA 7800GT CO @485/1.15, 1GBx2 Mushkin XP4000 Redline CE6, Enermax 660 Quad Rail
As for the FX-57...
Barton 2500+@2.7Ghz Air, NF7S v2, 1Gb OCZ 3500GX
9700Pro, PCP&C 510 - Old School Box - Now the GFs
New PC:
Opty 170 0543TPMW @ 2.73Ghz 1.55V, tT BT, Asus A8N32-SLI, 2x EVGA 7800GT CO @485/1.15, 1GBx2 Mushkin XP4000 Redline CE6, Enermax 660 Quad Rail
Hehehe....The words FREECABLEGUY and CHEAP will never be found in the same sentence...LOL.....
I have both enermax 660W (which not work with RDX200) and Zippy 700W that wont work with SLI-D jumpered 4V dimm. Its working ok with RDX though, but it kinda weird to run 3.6Vdimm w/out changing any jumper.
Same faith...RIP
Last edited by Dumo; 12-06-2005 at 11:51 AM.
The Zippy will work with the 4v jumper:I have both enermax 660W (which not work with RDX200) and Zippy 700W that wont work with SLI-D jumpered 4V dimm. Its working ok with RDX though, but it kinda weird to run 3.6Vdimm w/out changing any jumper.
Same faith...RIP
This was with my Zippy 700W when it was still alive and kicking
Ouch that sucks FCG
Phenom II 940 BE / ASUS M4A79 / HD5770 Crossfire
3770mhz CPU 2600mhz NB | DDR1040 5-5-5-15 | 900/1250
Sorry to hear Kris! Can we get a moment of silence for a dead FX..........
maybe you'll get a nice FX57 back from RMA like OPB 0524VPMW
retired computer enthusiast
freecableguy,
You have the worst of luck lately
-k0nsl
When you were born, you were crying and everyone around you was smiling. Live your life so that when you die, you're smiling and everyone around you is crying.
That 0524 wasn't an RMA AFAIK......maybe you'll get a nice FX57 back from RMA like OPB 0524VPMW
Man that sucks
Competition ranking;
2005; Netbyte, Karise/Denmark #1 @ PiFast
2008; AOCM II, Minfeld/Germany #2 @ 01SE/AM3/8M (w. Oliver)
2009; AMD-OC, Viborg/Denmark #2 @ max freq Gigabyte TweaKING, Paris/France #4 @ 32M/01SE (w. Vanovich)
2010: Gigabyte P55, Hamburg/Germany #6 @ wprime 1024/SPI 1M (w. THC) AOCM III, Minfeld/Germany #6 @ 01SE/AM3/1M/8M (w. NeoForce)
Spectating;
2010; GOOC 2010 Many thanks to Gigabyte!
That sux man.
Yeah, Enermax, OCZ, Tagan, and Antec are real good PSU's. You guys must have forgotton...
-Tagan
-OCZ
-Topower
^^All higher-end models, are teh same thing. Topower makes Tagan's Higher Models (2force) and OCZ's Powerstream and Modstreams.
Core i3-550 Clarkdale @ 4.2GHz, 1.36v (Corsair A50 HS/F) LinX Stable
MSI H55-GD65 Motherboard
G.Skill 4GBRL DDR3-1600 @ 1755, CL9, 1.55v
Sapphire Radeon 5750 1GB
Samsung F4 320GB - WD Green 1TB
Xigmatek Utgard Case - Corsair VX550
Posting Permissions
Reply With Quote
Bookmarks