cuz it seems as if THEY ALL (or at least most) have a "boo-boo." Don't quite know what it affects, but it sure looks like enough damage to do "something"
cuz it seems as if THEY ALL (or at least most) have a "boo-boo." Don't quite know what it affects, but it sure looks like enough damage to do "something"
hmm, will do that on monday, when i'll be installing my new videocard.
thanx
(1) CoolerMaster Cosmos S. . .(2) Corsair HX620. . .(3) Intel E8600 E0 /w TR Ultra-120 Extreme
(4) Asus Maximus II Formula. . .(5) Corsair Dominators 2x2GB PC8500. . .(6) WD Velociraptor 300GB + WD 320GB 7200RPM.
(7) ATI HD4870. . .(8) Creative X-Fi XtremeGamer Pro. . .(9) Hannspree 28" LCD + Soyo 24" LCD
I would RMA that.. why risk a good chip on an imperfect board?
Fast computers breed slow, lazy programmers
The price of reliability is the pursuit of the utmost simplicity. It is a price which the very rich find most hard to pay.
http://www.lighterra.com/papers/modernmicroprocessors/
Modern Ram, makes an old overclocker miss BH-5 and the fun it was
mine got that as well, but sounds like not doing anything bad for past week until now.
Another scary DFI feature. Now i'm curious, what will yhey have to say about this new one.
No boo boo on mine.
DFI LP UT P35-T2R | E8400 Q743A748 - IHS removed
Team Xtreme PC2 9600 2x1GB | Auzentech XPlosion
PCP+C Silencer 750W | 2x36GB Raptors RAID-0 | XFX 7800GT
Iwaki MD20-RZT | FuZion - 4.4mm - modified ProMount | PA120.3
it probly just effects the sound going out the rca jacks. im sure its not an issue.
Yeah I have the same thing on mine. I think there is something wrong with my eXpert cuz I couldnt even install an OS last night with 2x512 sticks of TCCD. I could only do it with one. When I put one stick in the first orange slot closest to the chipset I just get bios beeps. But when I put a stick in the second one it works just fine. I even tested both sticks of ram to make sure they are ok and they are fine. It just seems that the first 2 slots the orange and the yellow closest to the chipset done like to be used alone. Go figure....But now that my os is installed I can run dual channel using the orange slots. So WTF is it time for another RMA???
Yes, to RMA is to remove the filth that appears with the rest of your good hardware...
Fast computers breed slow, lazy programmers
The price of reliability is the pursuit of the utmost simplicity. It is a price which the very rich find most hard to pay.
http://www.lighterra.com/papers/modernmicroprocessors/
Modern Ram, makes an old overclocker miss BH-5 and the fun it was
Yikes...Should have my expert tomorrow, I'll be sure to check it out!
njkid and opb, you are both using phase right? Don't suppose there is a connection?
DFI LP UT P35-T2R | E8400 Q743A748 - IHS removed
Team Xtreme PC2 9600 2x1GB | Auzentech XPlosion
PCP+C Silencer 750W | 2x36GB Raptors RAID-0 | XFX 7800GT
Iwaki MD20-RZT | FuZion - 4.4mm - modified ProMount | PA120.3
Actually I sold my mach to perc cuz I am building a new special oneOriginally Posted by ixtapalapaquetl
So for right now I am using a TT Big Typhoon... I am going to try some bh5 next to see if its TCCD related.. So we will see.
i think i see that on my board as well, i have it in the case atm, so i have to take a closer look.
Desktop
[Asus Rampage III Gene] [i7 920 D0] [12GB OCZ3B2000C9LV6GK] [HIS HD 5970] [SeaSonic X750 Gold ] [Windows 7 (64bit)] [OCZ Vertex 30GB x3 Raid0] [Koolance CPU 360] [XSPC Razer 5970] [TFC 360 rad, D5 w/ Koolance RP-450X2]
HTPC
[Origen AE S10V] [MSI H57M-ED65] [ i5-661 w/ Scythe Big Shuriken] [Kingston HyperX LoVo 4GB ] [ SeaSonic X650 Gold ] [ OCZ Vertex 30GB SSD ] [ SAMSUNG Spinpoint 640GB 7200 RPM 2.5"][Panasonic UJ-225 Blu-ray Slot Burner] [ Ceton InfiniTV4]
I really dont think that little thing is a prob cuz it only relates to the s/pdif and I am not doing any recording...
What exactly is it?
___I am Xtreme... are you?
looks like a damaged trace or land area. My cap or resister (what ever the smd device is) doesn't look that damaged like the one in the pic, but the area to the right of it looks crispy.
Last edited by Diverge; 11-24-2005 at 07:03 PM.
Desktop
[Asus Rampage III Gene] [i7 920 D0] [12GB OCZ3B2000C9LV6GK] [HIS HD 5970] [SeaSonic X750 Gold ] [Windows 7 (64bit)] [OCZ Vertex 30GB x3 Raid0] [Koolance CPU 360] [XSPC Razer 5970] [TFC 360 rad, D5 w/ Koolance RP-450X2]
HTPC
[Origen AE S10V] [MSI H57M-ED65] [ i5-661 w/ Scythe Big Shuriken] [Kingston HyperX LoVo 4GB ] [ SeaSonic X650 Gold ] [ OCZ Vertex 30GB SSD ] [ SAMSUNG Spinpoint 640GB 7200 RPM 2.5"][Panasonic UJ-225 Blu-ray Slot Burner] [ Ceton InfiniTV4]
My first run very fine. I feel Expert more stable than previous nf4. Very good feeling. Need time to tweak.
sheesh.. I have been looking forward to the eXpert for a long time and then all of these problems.. it is really a shame.
I took a close look at a board with the damage, it looks like trace was cut and they put some kind of sealer over the exposed trace.
This might have been to fix audio problems, maybe buzz in audio.
Intel 9990XE @ 5.1Ghz
ASUS Rampage VI Extreme Omega
GTX 2080 ti Galax Hall of Fame
64GB Galax Hall of Fame
Intel Optane
Platimax 1245W
Intel 3175X
Asus Dominus Extreme
GRX 1080ti Galax Hall of Fame
96GB Patriot Steel
Intel Optane 900P RAID
or to prevent the CPU from frying
Fast computers breed slow, lazy programmers
The price of reliability is the pursuit of the utmost simplicity. It is a price which the very rich find most hard to pay.
http://www.lighterra.com/papers/modernmicroprocessors/
Modern Ram, makes an old overclocker miss BH-5 and the fun it was
I dont think so. Mine run fine.I will post result latter. Dont take all other good down with just one problem. Please fair with Expert. I see many good things about expert.
Last edited by linhvndiy; 11-25-2005 at 01:26 AM.
Did it came with boo boo right out of the box or did it happened after you had it up and running? I would RMA it even if it appears to be running just fine....
Core i7 920 D0 3844A717 4.40Ghz HT on @1.36v (LinX/Prime/3D stable), Corsair 850W, 12GB OCZ Platinum 1600, P6T Deluxe V2, EVGA GTX 285 SS, OCZ Vortex SSD 30GB x3 RAID0, HAF 932.
Water Cooling Setup: XSPC RX360, MCP355 + XSPC Res Top, Swiftech GTZ, 1/2" Tygon, Scythe S-Flex SFF21F push, 20mm yateloon D12SL-12C pull.
Opteron 148 CABNE 0528 GPMW 3.1Ghz @1.6v Prime Stable. Westy 37" LVM-37W3, DFI Venus 975, 2GB TeamX Cronus Micron, GSkill HZ, Sapphire X1900XTX, Zippy 700W, X-Fi Xtrememusic, 36GB Raptors x2 @Raid-0.
WC Setup: PA120.3 +Shroud, MCP655, STORM, MCW60, 1/2" Tygon, mini res, Yate Loon.
They are shipped that way.
I also was able to enjoy the sight of BSOD on OS load with 2 dimms installed. Eric pulled one chip and the OS loaded.
Intel 9990XE @ 5.1Ghz
ASUS Rampage VI Extreme Omega
GTX 2080 ti Galax Hall of Fame
64GB Galax Hall of Fame
Intel Optane
Platimax 1245W
Intel 3175X
Asus Dominus Extreme
GRX 1080ti Galax Hall of Fame
96GB Patriot Steel
Intel Optane 900P RAID
Man, that's not good though, would you please or others can try if you OC the INF (CE-6 or BE-5) after system hang, then the pair of ram NO MORE can be run as dual channel on this board?
Thanks
damn i've got to check that out
Posting Permissions
Reply With Quote
Bookmarks