X1800XT 810/940 watercooled

[SIOUX]

Update with a nature run in 01 with 1ghz on the mem


I disided to make a new thread, course we solved som problems, and i did some more benching the other thread turned out to be more like a "helping" thread good help that is......thanks "Atomicpineapple"

I was able to push the voltage to 1.58 messured with a DMM. this is max for atitool

I was able to bench at 823/1000 as max for today.

The card still have lot more in it. max temp under full load at 1.58 was 23 degrees water was 3 degrees warm.

Here are some screenies, and some compare links

2k1=44514

2k3=22142

2k5=12003

[flisko]

are u using atitool or overcloker.itried today and reach 750 on gpu on 1,4v.

[SIOUX]

are u using atitool or overcloker.itried today and reach 750 on gpu on 1,4v.

Ati tool for volts, and oc tool for clocks

[Dynasty]

very nice clks with the extra voltage SIOUX

I been reading that other thread about oc and ati tools issues.
Going to give my card another go on water this time.

[SIOUX]

very nice clks with the extra voltage SIOUX

I been reading that other thread about oc and ati tools issues.
Going to give my card another go on water this time.

Thanks i still need to find out how to use ati tools for clocks, course oc tool mess with the timings on mem. i had it working one time, and i score so much higher FPS at lower clocks

[HousERaT]

good job Sioux..... I've been following your progress for a while now and glad to see people are finally getting these cards to overclock and overvolt. Time to take it up a notch.

[perkam]

Is 3.3ghz all the FX will do on water ?? ... cos I think you're cpu limited for those clocks. BTW congrats on breaking 1800mhz mem on water

Shoot for 12k 05

Perkam

[SIOUX]

good job Sioux..... I've been following your progress for a while now and glad to see people are finally getting these cards to overclock and overvolt. Time to take it up a notch.

Thanks we gonna through the card under a vapo soon.

[Dynasty]

Thanks we gonna through the card under a vapo soon.

Well hope your card responds better under phase then mine did.

[[XC]Atomicpineapple]

Well heres my results, totally CPU limited by my 2.7GHz X2 3800+ card cooled by cheapo water, zalman RAMsinks on the mem.

10492 in 05 http://service.futuremark.com/compare?3dm05=1480327
20066 in 03 http://service.futuremark.com/compare?2k3=4425627

card at 790MHz 1.4V Core 1.8GHz 2.1V Mem

[SIOUX]

Is 3.3ghz all the FX will do on water ?? ... cos I think you're cpu limited for those clocks. BTW congrats on breaking 1800mhz mem on water

Shoot for 12k 05

Perkam

no...it does 3374mhz max benchstable, and 3580mhz on a Vapo LS


1800 mem is on air stock volts, with a fan blowing on them

[perkam]

So core on water and mem on air ? ... makes sense...but with a higher core comes room for higher memory So indirectly, the water cooling DOES help the mem

Perkam

[Okda]

omg a 2.7GHz X@ is a bottleneck

what shoudl we buy now :S

anyway cool scores dude

[SIOUX]

So core on water and mem on air ? ... makes sense...but with a higher core comes room for higher memory So indirectly, the water cooling DOES help the mem

Perkam

yes..core on water, and mem on air

[[XC]Atomicpineapple]

omg a 2.7GHz X@ is a bottleneck

what shoudl we buy now :S

anyway cool scores dude

Its a massive bottleneck, had to really push the card to get 20k in 03 due to the lack of CPU power, if my CPU had another 100MHz in it I'd have made 20k at much lower card clocks. And what are we supposed to buy now? Um, an FX-57 on phase would be nice, or a wicked clocking FX60

[flisko]

atomic u have same score like me ,i got 10469 points http://service.futuremark.com/compare?3dm05=1480124

[AndreYang]

good......

[Mayk-Freak]

very nice score!

[Hicks]

Very nice clocks!!!!!!!

[perkam]

atomic u have same score like me ,i got 10469 points http://service.futuremark.com/compare?3dm05=1480124

Are those clocks air ???!!!

Perkam

[RickCain]

What was your max overclock before you got the core to 1.58? I have been stuck at a low overclock on my BBA X1800XT.

[SIOUX]

What was your max overclock before you got the core to 1.58? I have been stuck at a low overclock on my BBA X1800XT.

My max oc with stock volts is 750 on the core

[RistoEe]

Wich block you have on your card?

And nice clocks ...Still waiting for my card

[SIOUX]

Wich block you have on your card?

And nice clocks ...Still waiting for my card

I modded an old Asetek waterblock, so it fits on the card

[wkmgt]

Well Done Sioux!! I've used an Asetek CPU block for GPU. It did a nice job.....