MUSHKIN PC4000 2gB SMOOKKIINNNNN!!

[JNav89GT]

I set the exact same settings as posted a couple above. tried 4xhtt and 3x.

250 at those settings run fine, I just know my chip can do 2.6 and i bought this memory thinking it was almost 99% sure i could hit 260.

I was even contemplating removing my IHS on my new opty if this sticks clocked really well, but i don't like mem multi's, and 250 is as high as they will go.

EDIT : i haven't tried 3-3-3-8 maybe i will try some other time when i am not so frustrated.

i'd try bumping the cpu multiplier to 10x just to confirm ram is holding you back

I really think the secret is in your bios somehow though!

[JAM_N1]

I just recieved some Mushkin 2GB XP 4000 Redline (2x1GB), I can run both sticks through Memtest stable in single channel, 1 or 2, but when I try to install second stick in second channel, 3 or 4, the board freezes on bootup with 3 lights. I have tried both the yellow and orange slots with the same result. I can put my G.Skills back in using both channels, orange, and the board fires up. Anybody know why the XP 4000 won't boot up when running both channels? I have dropped the clock in my sig to 250x12. Any help would be greatly appreciated for I am stumped.

[bigjohns97]

i'd try bumping the cpu multiplier to 10x just to confirm ram is holding you back

I really think the secret is in your bios somehow though!

My multi is 10x, I have a opty 170 default clocks 200x10. it was running just fine with my old memory @ 1:2 divider.

Plus i can run dual prime small fft all day @ 260 without a hitch.