Enermax Liberty 500W

[perkam]

Enermax Liberty 620W
http://www.newegg.com/Product/Produc...Supply+for+Cas

Enermax Liberty 500W
http://www.newegg.com/Product/Produc...82E16817194003

And something else I found out

412W with a stock FX55, Stock cards, One GB of ram stock, One HD and integrated audio. Add a couple HD's, 2GB ram, OC everything. You are on the edge. You might get away with it. I know a Antec NEO 480 will not run it. I tried more than one. A NEO will run a SLI 256MB OC'd, FX57 @ 3GHz,2GB of ram @ 500MHZ, 2 raptors and 1 seagate. I added the 512MB cards stock and the system was very unstable. (It did run a single 512MB card fine.) I went to a 620 Enermax Liberty. (We use modular supplies for looks as the case is acrylic.) These cards draw 22A from the 12V line per card so if your PSU is rated for that you should be fine. All I am saying is that if you have the $$$ for two 512MB cards speed the little extra and buy a 550+ Watt PSU to give your self a little headroom.

It seems even the Enermax Liberty 500W should be able to handle that

Perkam

[CapFTP]

It seems even the Enermax Liberty 500W should be able to handle that

Perkam

mh....I'll try asap (i hope) with 2x7800 gtx 512 megs SLI....perhaps a good 3700+ clocked and some more...

We'll check..