2x1GB Crucial Ballistix z503 + A64 3700+ KABYE 0540BPMW

[mag|c]

San Diego 3700+ KABYE 0540BPMW (NOW CONFIRMED) cooled with Zalman CNPS9500
DFI nF4-D@nF4 SLI-D R.A00 (Bios: The new FX60 ~ 11/14/05)
ASUS x800XT PE w/ Cat. 5.10 & cooled with Zalman VF-700Cu
1x WD Raptor 36GB SATA NCQ
1x WD Caviar 120GB ATA
NEC DVD-R
Floppy drive
Tagan TG480-U01
- The CPU does 3GHz air cooled spi32m, 3dmark stable but failes prime at about 4 hours.

Windows XP SP2 + Updates
nVidia 6.70WHQL

CPUZ Validated:
http://valid.x86-secret.com/show_oc?id=50941

- This is quite ok for Micron-5B D @ 2.7v isen't it?
SPI32m:


Have to leave for work now.

-Update

Lowering Trfc to 12 from 14 resualted in ~ 5secs lower spi32m score

[mag|c]

Btw, I just aimed for 285mhz @ 2,7v in first shot, so there could be more in these sticks.

[ozzimark]

actually, can you do me a favor?
on the end of the part number for your ballistix, there should be a short thing like .16TD, is this what yours says?

nice clocks though.. good to see KABYE pulling through, the stepping seems cuirously similar to the opterons

[eva2000]

very nice.. like the format... looks familiar hehe

[wwwys]

Ns job,

here is mine

http://valid.x86-secret.com/show_oc?id=50988

[mag|c]

actually, can you do me a favor?
on the end of the part number for your ballistix, there should be a short thing like .16TD, is this what yours says?

Mine says 16TD aswell, worth to mention tho, it's two stick bought at the same time, not a dual kit

very nice.. like the format... looks familiar hehe

Yeah I know, it's pure rip off , but I liked your design... Hope it's okay?

Ns job,

here is mine

http://valid.x86-secret.com/show_oc?id=50988

Thank you, very nice resualt yourself I think mine could do around the same, but I like the temps that comes with 2,7v

[eva2000]

Yeah it's fine.. you inspired me to swap in my 2x 1GB Crucial Ballistix PC4000 Tracers to test on my opteron 146

[mag|c]

eva2000: I'm glad too hear that.


Perhaps I should try 3-3-2-0, anyone think what would be possible?

[ozzimark]

Mine says 16TD also, worth to mention it's two stick bought at the same time, not a dual kit

ok, thanks
and dual kits are over-rated

if you should try anything, try 2.5-2-2

[mag|c]

ok, thanks
and dual kits are over-rated

if you should try anything, try 2.5-2-2

At 285mhz with 2,7v I doubt that

[ozzimark]

yeah, you'll have to drop down the mhz a bit.. but personally, i think 2.5-2-2 is around micron's sweet spot. depending on your sticks, 2.5-3-2 or 2.5-2-3 may be a bit more optimal

[mag|c]

yeah, you'll have to drop down the mhz a bit.. but personally, i think 2.5-2-2 is around micron's sweet spot. depending on your sticks, 2.5-3-2 or 2.5-2-3 may be a bit more optimal

At my current mhz and voltage lowering Tcl, Trcd or Trp and my rig will hang while booting.
But lowering Trfc to 12 seems to be working flawless.

[ozzimark]

what happens if you relax Twtr.. you're one of two people i know of with micron 1gb sticks that are running high mhz at 1

[mag|c]

what happens if you relax Twtr.. you're one of two people i know of with micron 1gb sticks that are running high mhz at 1

so i guess i'm lucky? i'll try - right away.

[mag|c]

upping Twtr to 2 didn't help on lowering any of these Tcl, Trcd or Trp, did even try upping Trc to 12 & Trfc to 19. 3-3-3-0 seems to be the tightest i can run 285 at 2,7v.

[mag|c]

Just ran spi1m with vcore at 1,45v


CPUZ Validated:
http://valid.x86-secret.com/show_oc?id=51078

And 32m with vcore set to 1,475v


CPUZ Validated:
http://valid.x86-secret.com/show_oc?id=51082

same timings and voltage for the ballistix as for 285mhz, tho i wonder why the time is 15sec slower than before (look in first post)

[ozzimark]

same timings and voltage for the ballistix as for 285mhz, tho i wonder why the time is 15sec slower than before (look in first post)

you had other stuff running?

[eva2000]

Just noticed the bios you used was the new FX60 bios ? how was that compared to other bioses you used for these Ballistixs ?

[mag|c]

you had other stuff running?

believe mbm were the only other thing running´

[mag|c]

Just noticed the bios you used was the new FX60 bios ? how was that compared to other bioses you used for these Ballistixs ?

it seems way better than 623-3 and 704-BTA

[TheMeatFrog]

What drive strength and data drive strength are you using with that FX60TEST bios for your ballistix?

[Ferry82]

what happens if you relax Twtr.. you're one of two people i know of with micron 1gb sticks that are running high mhz at 1

3 people now @300mhz 2,85v




Gonna try tighter soon. Update!!