FX57@3893 Superpi 21,844

[k00lance]

thats -94

[k|ngp|n]

k|ngp|n,

You ought to go to CES (Vegas) in January. Do some partying with OCZ and the boys.

OPP

I just told fugger the other day I want to go with XS....I'm going for sure Eric :P

[OPPAINTER]

I just told fugger the other day I want to go with XS....I'm going for sure Eric :P

That will be cool.
I want to organize like I a buffet dinner or something. We’ll get the boys from OCZ, Scary Harry from Abit, the world famous Vivian from Corsair and all the Overclockers we can scrap up We’ll chow down and talk story, it will be cool

OPP

[OPPAINTER]

If you find somthing Please let me now what too do

Fugger has a bios that shuts off the temp reading.
He is either going to e-mail it to me or post here in this thread.

Test it and tell us if it works

OPP

[OPPAINTER]

Here is a bios that Fugger sent me. I'm not sure how it works, you may want to ask him. I think it adds XT voltage.

OPP

[Charles Wirth]

http://fugger.netfrims.com/r520xt.rom

Kingpin has tried both bios files and was unable to fire up on the temp reading bios. The difference is Vince has a real XT and I know this works on XL.

ATI explained to us that there are different revs of cards now and the bios I have will not work on all cards.

[Overklokk]

http://fugger.netfrims.com/r520xt.rom

Kingpin has tried both bios files and was unable to fire up on the temp reading bios. The difference is Vince has a real XT and I know this works on XL.

ATI explained to us that there are different revs of cards now and the bios I have will not work on all cards.

What flash prog must i use?

[Charles Wirth]

Winflash 1.0.5.0

I dont have link.

[alexio]

http://www.techpowerup.com/bios/bios/winflash105.zip

This is the latest

[Kaffebord]

Good work as always overklokk.

Greetings from Norway

[CrashOv3r1De]

OPB what cooling did you use with that SPI run -38C? Must be some kind of custom cooling or modded prom/vapo.

[i found nemo]

sweet bro, just plain sweet

[Kunaak]

OPB what cooling did you use with that SPI run -38C? Must be some kind of custom cooling or modded prom/vapo.

A modded Prommy on a DFI NF4 should only read about -20C when at Idle.

-38C is alot more then a modded prommy.

don't let the temps fool you.

[Dumo]

Nice 0530 and cascade there Overklokk Killer combo..

[G H Z]

OK, so how did the flash go Overklokk?

[Overklokk]

Nice 0530 and cascade there Overklokk Killer combo..

Tnx

Tested one more 0530 today its my friend Stoolman who owns it. It has a higher batch than mine and i hawe too run looser timings on it. It hawe a little cold bug but after som tuning it running 3,9 with -90c on evap. Not so good in SP as mine but realy fast FX this also



I wil try too flash the XL card today.

[Overklokk]

tryed the flash today but get problem... the card is komming up as MPXX somthing and i cant get the drivers instaled .......

i think i need som other XT bios... can someone save their xt bios and give it too me?

[chainhoe]

grats on 200.3 fps CH

[k|ngp|n]

The temp reading bios made my card (xt) completley inoperable, so I would strongly advise against flashing to it if you have an xt. THe only way to bring it back to life is to "hotflash"it with another pci card. I have been experiencing some issues with the card and I am pretty sure it's the cold causing it. It rocks at 720/830 at 10c evap temps, but as soon as I go below zero I get trouble....even at only a few mhz higher.

btw--These are the correct reading points on the xt:

Maybe there are differences between cards(x1800-x1800x), but all these reading points in color were wrong for my card. THe ones in black are correct.
The overclocker utlility does a pretty accurate job of increasing all three settings. I am going to do some monitoring of the card volts under load today.

[CrashOv3r1De]

A modded Prommy on a DFI NF4 should only read about -20C when at Idle.

-38C is alot more then a modded prommy.

don't let the temps fool you.

Ahh wow, I smell a cascade

[k|ngp|n]

The card is throttling the volts back about .05 under load as well as the clocks if I go just a little below 0c...maybe 1 or 2 degrees c. Working on getting the right bios still....

[Dumo]

A modded Prommy on a DFI NF4 should only read about -20C when at Idle.

-38C is alot more then a modded prommy.

don't let the temps fool you.

It was with DI

[T_M]

leet paintbrush skills king