Bowman,
Did you have to mod the CPU or anything to get the 13 and higher multipliers to work?
I have a XP 2500 on its way finally, and I will have it by thursday, I am just hoping it lets me use the 13 and higher with no modding needed.
I hate cutting up CPU's.
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
yes i had to cut the chip to go to the 13x and up multiplyers
and since i always back up my work with pic'c here is the xp2600 i cut.the excate same thing i did to the barton.
so the 4th L3 bridge, going from left to right?
when you cut it, can you just so a small light cut with an Xacto knife and have it work?
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
sorry been in and out ...
but yes as you can see in the pic.i had to cut the 5th L3 on the pic.that is a actual pic of my chip after i cut it.so i used a Xacto knife and made a few passes back and forth.i like to cut a little and try it and if i didnt cut deep enough it try again.but as you can see i had to cut a ways down
bowman did you cut the L12 on the Barton also? If so what were the results?
I know you cut it on the 2600, and said it gave you the ability to run higher fsb EVEN on the 8RDA.. I haven't tried that yet, been thinking about it though.
Zen2 Has brought AMD back!
yes my friend i did cut the barton.but is very hard to tell if it helped because i didnt play with it much before i cut it.Originally posted by muzz
bowman did you cut the L12 on the Barton also? If so what were the results?
I know you cut it on the 2600, and said it gave you the ability to run higher fsb EVEN on the 8RDA.. I haven't tried that yet, been thinking about it though.
i am running so rock solid right now i hate to change ......i havent had a system this fast with out a crash in a long time.
my 3dmark score were run at once within a few hours of each other.no special setups or long drawn out benching sesions like before.
i have only completed proberly 5 3d2001se tests and 2 3dmark03.to get the scores i have.
i need to start uping the chip this weekend to 2.8 again but with new ram on the way i am going to wait..
being the fastest is nice .mine wont ever do 3.0g i believe like some have reported but i can run mine all day long without LN or dry ice.and keep going.
Most def. nice to be able to run that high solid bro
But I would be lying if I didn't say to you that I wasn't at least a little disappointed with what SEEMS to be(AON) the ceiling of your chip....... I figured/hoped with your cooling 2950+mhz would be reasonably achievable.... I never thought that the chip would run cooler myself( just because it's bigger), I figured hotter with all the extra cache, and was a bit concerned about the ceiling with that extra cache also.....
Maybe after some more batches it will be a bit better as the tbredB became, and you can sell that 1 on ebay.......
Thanks bowman, and Good Luck bro.
muzz
Last edited by muzz; 02-27-2003 at 09:56 AM.
Zen2 Has brought AMD back!
Hi everyone!!
I have ordered a Barton 2800+ which run at @ 2083.
Do any of you think that I can get it to hit over 200FSB with an ASUS A7N8X,Corsair 2x512 3500 & watercooling?
At the moment I don't want to voltage mod it. Just with max 1.85vcore & 2.8vddr.
Thanx
Kanch
You are really gonna need a VDD-mod to get over lets say 200. (some ppl can get the fsb to 210+ without VDD-mod but they are lucky sons of §§§§§esOriginally posted by kpothuwila
Hi everyone!!
I have ordered a Barton 2800+ which run at @ 2083.
Do any of you think that I can get it to hit over 200FSB with an ASUS A7N8X,Corsair 2x512 3500 & watercooling?
At the moment I don't want to voltage mod it. Just with max 1.85vcore & 2.8vddr.
Thanx
Kanch)
Duron 600@1521MHz with 3V+ Vcore RIP
one of the guys on overclockers.com in the amd forum got the XP 2500 to 2930, or so, it was 12.5x 233...
my barton 2500 mysteriously died for some reason.
it was non-overclocked, and worked perfect in my Kt-333 board, then simply never posted once I put it in my NF2 board.
I didnt even get around to cutting the CPU or anything, cause I didn't even get to see if the NF2 unlocked the CPU's multipliers.
I maxed it out on air at 2470 with 1.9 volts, didn't even get a chance to use it in my Prometeia...
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
R.I.P
Posting Permissions
Reply With Quote
Bookmarks