just had to share with you guys. Beware of pumping too many volts through these.
just had to share with you guys. Beware of pumping too many volts through these.
what happened?
Got a fan over those memory sticks? No? Well get to it before you kill them
http://www.xtremesystems.org/forums/...t=79113&page=2
read....
note this happened on a Hyper 6 with the windows open.
nvm
Q6700
MSI P35
8GB OCZ
2xHD 2900 XT
PCP&C 1kw
I told you guys to try to stick under or around 1.6v.. but noo....
They had to crank it off the starting blocks...
Fast computers breed slow, lazy programmers
The price of reliability is the pursuit of the utmost simplicity. It is a price which the very rich find most hard to pay.
http://www.lighterra.com/papers/modernmicroprocessors/
Modern Ram, makes an old overclocker miss BH-5 and the fun it was
1.7v on air is really asking for trouble. But the way it burned sounds like poor IHS contact. I mean even Preshots dont do that. Heck even the old school athlons didnt do that.
Asus Rampage Formula X48
Intel Q9650 @ 4.33GHZ
OCZ Platinum DDR2-800
Palit 4870x2
Creative Xi-Fi Extreme Music
Corsair HX1000
LL 343B Case
Thermochill 120.3
2xMCP355
KL 350AT
KL 4870X2 FC WB
DD Chipset Block
imo 1.7V which any cooler is asking for trouble.
both my opty 144's had a mind of there own soon as the volts got to 1.65V
shame to loose a nice chip
I7 920 D0 (4.2GHZ HT on) // eVGA Classified // 6GB Corsair dominator 1600mhz // Asus HD5770 x2 // Corsair HX850 /--/
PA120.3 // EK Supreme LT // MCP655 // MM Ufo (soon to be TJ07)
AMD becoming like intel can't handle volts.. I miss good old days of 2.2 volts though tbred no problemo.
my fx-51 took 1.8v fine for a few months...then i killed it trying to take the ihs off...(ceramic cpus crack when u do this!)
Originally Posted by Call me Ugly
ALright alright. rub it in. But on another note. my x1800xl is screaming! 654.75mhz 1.225v core/ 756mhz 2.2v mem on air nonetheless.
we are not rubbing it in, we are just saying that we warned you before hand...
Fast computers breed slow, lazy programmers
The price of reliability is the pursuit of the utmost simplicity. It is a price which the very rich find most hard to pay.
http://www.lighterra.com/papers/modernmicroprocessors/
Modern Ram, makes an old overclocker miss BH-5 and the fun it was
my cpu says your cpu is in hevan, he just got an e-mail and will be visiting soonopty abuser!!! lol
mobo: strix b350f
gpu: rx580 1366/2000
cpu: ryzen 1700 @ 3.8ghz
ram: 32 gb gskill 2400 @ 3000
psu: coarsair 1kw
hdd's: samsung 500gb ssd 1tb & 3tb hdd
1.7v on air?
you were asking for it
....
did you happen to look at temps in the bios before booting into windows?
Got a fan over those memory sticks? No? Well get to it before you kill them
agreed
312 Xeon Threads + GTX 1080 + GTX 1070 + BFL Monarch 700
Toasty...
Thuban 1090T @ 3.8Ghz | Corsair H70 | G.Skill DDR3 16GB 1600 Cas9 | Gigabyte 880GMA | HD5870 | Corsair AX750 |
I7-875K @ 3.6Ghz w/HT on | Corsair H50 | G.Skill DDR3 4GB 1600 Cas6 | Asus Sabertooth | GTX260 | Corsair 850TX |
Q6600 G0 @ 3.0Ghz | G.Skill DDR2 2x2GB PC8000 | DFI LP JR P45-T2RS | HD3850 | Corsair 620HX |
E6400 SL9T9 @ 3.0Ghz | G.Skill DDR2 2x1GBHK (4-4-3-5) | Intel Bad Axe v3.06 | X1950PRO | Corsair 550VX |
what was your Vdimm at the time?
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
lol. I haven't been on here in a while. I underestimated this new chip. My venice likes volts around 1.7v I didn't come on here to get flamed. the way I do things is start high and work down. some start low and work up. we are just different.I learned a lesson the hard way and I encourage you all to do the same.
Posting Permissions
Reply With Quote
Bookmarks