can you give us more info on your full setup including hardware you are runningOriginally Posted by Special_K
all K's old stuff =]AsRock 939 Dual Sata2 » Winnie 3200+ @ 400 x 4 = 1.6GHz (1.58v) » 2x256MB 3200LLPT (2,3,3,10-1T @ 2.7V) » ati9700pro » Tt SilentX 560W
BIOS is the OCWB1 - it has a cold bug at high HTT so you have to clear and reset every time you reboot - that and the 6x & 7x multi don't work =/
Vcore mod for 1.58V was easy - forget the one in this thread, all you have to do is make a small solder bridge between 2 pins and set the bios VID to 1.35V
Nuh done the VDimm mod yet - prolly will just use OCZ booster instead, but this was done with bios 'HIGH' setting
photo of the Winnie stepping is AWOL, so will have to get a new one when this opteron replaces it, but it's pretty normal (330*8 on the runup to 400)
Hyper6 heatsink with a regular/budget 80mm fan + 120mm fan blowing over RAM, NB, & SB heatsinks (they are all passive on the Asrock) - NB gets pretty hot without a fan
RAM & gfx are at least 5 years old =]
Last edited by Special_K; 11-03-2005 at 03:09 PM.
Posting Permissions
Reply With Quote
Bookmarks