X1800 Xl = Wow!

[JuanFlaiter]

I have this one


605/715
1.175v/1.9v

Crappy lent Venice roofed out in water

[LexDiamonds]

Nice pics guys... sexy stuff.

[G H Z]

Heres mine


661/711
1.225/1.20v

[gunit]

could u guys check multi fill rate at 648 core in 01 and pleae tell me what u get?

[mR Yellow]

OK guys, i finally got around to OCing this baby.
All went well, but i soon realised that u need to up the voltage once u go past the 600mhz zone.

I used stock cooling. AIR.
Should be able to push it even higher. But i decided to stop....for now.

Here are my results.



BTW. I have a GeCube, so it seems that all x1800XL are pretty standard.

[cantankerous]

OK guys, i finally got around to OCing this baby.
All went well, but i soon realised that u need to up the voltage once u go past the 600mhz zone.

I used stock cooling. AIR.
Should be able to push it even higher. But i decided to stop....for now.

Here are my results.



BTW. I have a GeCube, so it seems that all x1800XL are pretty standard.

That is what I liked to hear, All cards seem to be standard. I say this because locally I can only get Sapphire cards and nothing else yet all these high overclocks are mainly from BBATI cards which left me wondering if Sapphire cards can overclock well at all. I am loving the sound of 630+ core stable and artifact free with 1.225v. If I can get a card like this I would be quite happy. 775 on the mem with stock volts is sick as well.

[mR Yellow]

That is what I liked to hear, All cards seem to be standard. I say this because locally I can only get Sapphire cards and nothing else yet all these high overclocks are mainly from BBATI cards which left me wondering if Sapphire cards can overclock well at all. I am loving the sound of 630+ core stable and artifact free with 1.225v. If I can get a card like this I would be quite happy. 775 on the mem with stock volts is sick as well.

Check my post, mem volts wasn't stock. Volt had to be bumped up a little but this aint a problem. These cards need more volts anyways

Volt them up and see them fly. I think anything up to XT speeds is safe. I don't know whos gone higher?

[Astennu]

Lol something gous wrong. I cant set higher than 525-509. And cant use the 3D clocks button :S. Strange .

I'm running the ATi 5.10a drivers anyone that can help me ?