well my xp2800 barton is here and looks like i have a hot one...i hope.
i ordered a retail cpu for a change thinking that first batch of cpu chips would go to the oems and the later batches would get marked for retail as soon as the release date was near.and i might have called it right.
my chip
AXDA2800DKV4D
9411446260091
AQUCA 0304RPAW
that gives it a week of 4 ..last week of jan 03 .so this chip is just 3 weeks old.
here is a pic.
Well enough of pictures, get this sucker into a system and crank that sucker up! Make it scream and let us know what it gives yea.
OMG im awaiting your results man, im looking into the 2500+ myself
Intel i7 3930K C2 @ 4700 mhz (100 x 47) 1.4v
EK Supremacy/EK XTC 420+280/EK DCP4.0/PrimoChill 1/2 ID 3/4 OD
Asus Rampage IV EXTREME
16 GB G.Skill RipjawsZ @ 2400 CL10-12-11-1T
Zotac GTX670
Antec Quattro 850W
Intel 330 180 GB + Micron C400 128 GB
LD Cooling PC-V7 B/R
Oh manGet back with us and let us know how it does. Good call on the retail . I like the warranty also.
Maximus Formula||E8400 9x445 1.42v||2x2GB GSkill PC8000||150GB Raptor||ATI 3870 840/1200||Vista64
DFI NF4 Ultra-D modded to SLI-D||Opteron 165||4x512MB Patriot XBL 2.7v||X850XT 575/594||37GB Raptor||Seagate 120gb||Audigy 2 ZS||XP Pro
You're one lucky man. Now lets get to them stats hehe
well as soon as i get home and feed my kidds i will play with my chip.i am still at work.
by the way.in case any of you thought i purchased the retail for that extra warranty......lol i am afraid not...
i will be cutting the chip maybe before the night is over if i have to to gain me some higher fsb room.
the reason i ordered the retail is just to help my odds of getting a newer week chip.plain and simple help the odds a little.a xp2800retail is only $8 higher than the oem in some places.and for $8 i am willing to give to help me get a better core.and i can always use the heatsink for something if nothing else cut it up for some mofset coolers.lol
now in a few months after they get out ..i wouldnt pay any extra but would buy the oem ,by then they will have better weeks.
dont worry i will be posting late tonight with some results
Why cut? Why not "blow the bridge" using a battery as I have seen other talk about. Supposedly undetectable and you can still RMA the chip under warranty later if you need to.Originally posted by bowman1964
by the way.in case any of you thought i purchased the retail for that extra warranty......
i will be cutting the chip maybe before the night is over if i have to to gain me some higher fsb room.
Then again, I've never tried either method and would be somewhat paranoid to do so in the first place.
Anyway, good luck with the chip and let us now how things go ASAP! :thumbsup:
Epox 8RDA v1.1 | Athlon XP 2100+ AIUHB 0301 @ 2205 mhz (200x11) @ 1.8v | Radeon 9800 NP @ 378/324 | 2x256 MB of Corsair XMS PC3200 CAS2 | Maxtor 80gig 5400 HD | Linksys LNE100TX | SLK-800 w/42.5 cfm Sunon 80mm fan | Antec SX830 w/Antec SL400 PSU
Cant you tie wier arround the pins under the chip?
He could do the wire trick if he was connecting 2 bridges.... he is disconnecting though.
Zen2 Has brought AMD back!
hurry up !!!!!!!!!!!!!!!!!!!!!Originally posted by bowman1964
well as soon as i get home and feed my kidds i will play with my chip.i am still at work.
by the way.in case any of you thought i purchased the retail for that extra warranty......
i will be cutting the chip maybe before the night is over if i have to to gain me some higher fsb room.
the reason i ordered the retail is just to help my odds of getting a newer week chip.plain and simple help the odds a little.a xp2800retail is only $8 higher than the oem in some places.and for $8 i am willing to give to help me get a better core.and i can always use the heatsink for something if nothing else cut it up for some mofset coolers.lol
now in a few months after they get out ..i wouldnt pay any extra but would buy the oem ,by then they will have better weeks.
dont worry i will be posting late tonight with some results
Updating...
Would like to see 2750-2800MHz out of that one
Intel Q6600 3.6-1.4V, Asus Maximus formula(0907) 4Gig 2x2 GSkill 6400 3*320Gig WD KS Raid0, 3870's-CF, Seasonic 700W, SSTJ07, Dell 2407 Vista 32
If it was me i would definately be pulling a sickie..
Can't wait to see ur results..
Da[]San
3dmark 2001 21519
KWIKLY I wanna see oc.. bTW i hope you run prommies or sumthin hardcore..
cutting the bridge is easier than blowing the bridge...
all you need to do is take a quick stab at it with an xacto knife and youre done
"it is better to be thought of as an idiot, than to open your mouth and prove it"
oo yeah use your phase change setup on it. Actually it would nice to know what it'll do on air but hey, it would be nice to see the limits of the chip. Let us know!
AMD Phenom II 1090T @ 4GHz
MSI 890FXA-GD70
4GB G.Skill PI DDR3 1600 C6
OCZ Agility 2 60GB
Visiontek Radeon 5850
Antec Nine Hundred
Watercooling:
Enzotech Sapphire Rev.A
Swiftech MCW80 + 5850 heatsink
Swiftech MCP655
Swiftech MCR320
I'm just waiting for some results on wether or not to buy myself one.. I got plenty of crap I can sell to make up for the price of a barton if they're good enough
Dinosaurs are chortling.
Lian Li PC1200B, Custom Water Cooling, Lamptron FC5 Fan Controller w/ 4x 120mmx38 Deltas
i7 930 @ 3.8ghz, Rampage III Extreme, 12GB G.Skill PC2000, BFG 260GTXOC, PNY Quadro 380FX
(1) HP LP2475w 24", (2) Dell 2007WFP 20", Corsair AX1200 1200w, 3Ware 9650SE Raid
(2) 500gb Hybrid Seagate Raid 1, (2) 2TB WD Red NAS 64mb Raid 1, (5) 1TB Hitachi 32mb Raid 5
well unlike the xp2600....so far it seams to run fine at high fsb.
on air i got it up to 2400mhz 218x11@1.8v .but i have no mutiplyers over 12.5.so i am at the moment removing the foam corner suports on the chip and replacing them with epoxy mounting pads.(i do every AMD i own like this.)to prevent chipping of the core. and i am cutting the L3 also.i will need the 13 multiplier i hope. i did make a 3dmark03 run to see how it ran at that speed on air.here it is.
i am now trying to install in my evaperator back on the chip to cool her down.
Good work and quick benches, thanks a lot bowman. I've been looking forward to an unbiased Barton review for a while now, especially one without handpicked chips. When you cool that puppy down, I can imagine your benches. Thanks man.on air i got it up to 2400mhz 218x11@1.8v
XLNT bowman.... keep us advised of your progress bruh.
Zen2 Has brought AMD back!
well cut the L3 bridge and got my upper multiplyers.so i am working on reinstalling the evaperator tommorow and push it a little harder lol
my last xp2600 started off about the same overclock on air and finally made it to a stable 2834mhz that i have been benching with.i hope this barton gets about the same.but i will see tommorow night i hope.
y don't you have multi's over 13
your epox bios should support that I would think, but then again what is the default multi of the 2800+ again?
it's never fast enough!
12.5 is 2800+ Mult.
Bowman, which L3 bridges did you cut / connect?
On a different note, if you remember a guy who goes by "jacktheripper", were about done with the R404 unit.
Proud Founder of Redline 3D
yes it uses a 12.5 x166...and i know everyone thinks these boards unlock the new chips but at this moment they do not allow multiplyers over 12.5.Originally posted by Hallowed
12.5 is 2800+ Mult.
Bowman, which L3 bridges did you cut / connect?
On a different note, if you remember a guy who goes by "jacktheripper", were about done with the R404 unit.
my xp2600 was the same way that is why i have no problem cutting the chip ,as i have done it before.
this maybe solved with a bios change down the road but not yet.
anyway here is the bridge i cut .
Sweetness dude, lets see how it does.
Abit NF7-s
AMD XP2100+ @ 2.63Ghz
Corsair XMS3000
ATi 9500 @ 411/297
Posting Permissions
Reply With Quote
Bookmarks