G.SKILL F1-3200DSU2-1GBFX REVIEW & DISCUSSION

[GSKILL TECH]

Now this is service folks! Thank you for the update, I am really excited to try these on my ABIT An8 b/c the board hates the Crucial Ballistix

*IF* possible, can you try 1T with this memory on the AN8 from ABIT? If not I will be the test dummy

i really love to try, but.... i don't have the mobo....

[tomati]

any ideas in pricing for europe?

I have found one german shop where they are listed at 185€ .

[GSKILL TECH]

http://www.newegg.com/Product/Produc...82E16820231035
$152
Newegg place them yesterday. but sold out now!

[865pe]

<a href="http://imageshack.us"><img src="http://img397.imageshack.us/img397/8755/screenshot0031tp.jpg" border="0" width="875" alt="Image Hosted by ImageShack.us" /></a>

[GSKILL TECH]

<a href="http://imageshack.us"><img src="http://img397.imageshack.us/img397/8755/screenshot0031tp.jpg" border="0" width="875" alt="Image Hosted by ImageShack.us" /></a>

r you serious!
it is super good my friend

[axan]

damn guess i got the odd set, my wont go over 250Mhz

[GSKILL TECH]

damn guess i got the odd set, my wont go over 250Mhz

some pictures of A64 might help me to help you

[Tamille]

GS.Technician is there any reveiw for this DDR 500 ram as i can't find the product code on your web site unless i use the sellers link.
G.Skill F1-3200USU2-2GBHZ 2GB PC4000 with Heatspreader.

Is this ram the same G.Skill F1-4000SU2-2GBHZ 2GB PC4000 with Heatspreader

[Tamille]

Is this code correct for PC4000 500DDR

[Tamille]

here is the link from G.SKILL.
http://www.gskill.com/f1-3200usu2-2gbhz.htm
how can it be 3200 when it is 4000


GST:
I edited the wrong thread

[GSKILL TECH]

here is the link from G.SKILL.
http://www.gskill.com/f1-3200usu2-2gbhz.htm
how can it be 3200 when it is 4000

only the "link name" wrong, if you go to
http://www.gskill.com/ddr.html
and check every product you will link to correct page. it just a "error file name for html"

[jrw]

How far will yours go 2.5-3-3-X?

32M ofcourse

[GSKILL TECH]

i can get 2.5-3-3-5 to around 295 but not 300

[jrw]

OK.

Thank you.

[Temujin]

i can get 2.5-3-3-5 to around 295 but not 300

G.S. Technician, have you (or anyone in here) run 4 sticks of 512mb TCCD rams before to see if it still benchmarks as with 2 sticks?

No where on the internet have I found anyone that has tested or posted an overclock or superPI test with 4 banks of memory. I am so close to buyin 4 sticks if the results are similar or at least decent.

Perhaps, can you test the theory G.S.Technician? I am very curious to see the results and scores of 4 banks of memory. (Or anyone else out there if you have the gear on hand).

Thanks for your time.

[scampi]

my g.skill FX on DFI nf4 with 623-3 bios

[GSKILL TECH]

@scampi
very nice result

@Tem
i haven't try 4 sticks together yet, but i check with other ocer, DDR600 2T 4stick is much slower compare to 1T

[scampi]

@scampi
very nice result

@Tem
i haven't try 4 sticks together yet, but i check with other ocer, DDR600 2T 4stick is much slower compare to 1T

I am the Italian people who ask you to send g.skill ram from digi4me shop ..remember?

[GSKILL TECH]

I am the Italian people who ask you to send g.skill ram from digi4me shop ..remember?

i see, they don't wanna ship to outside of S anymore lol

[Temujin]

Thanks G.S Tech! Some other people have had 4 sticks of ram and the 2T timings ended up slowing the system quite a bit.

It would require a high-decent overclock to offset the performance. And 4 sticks won't post a high enough overclock.

I ordered a new system:

AMD Opteron 150 (socket 939)
2x1024 G.Skill (ZX 2-3-2-5)
DFI Ultra-D NF4 (lanparty...uh yeah...)
XFX-UDE7 (rev 2 copper) 7800 GT

[GSKILL TECH]

Thanks G.S Tech! Some other people have had 4 sticks of ram and the 2T timings ended up slowing the system quite a bit.

It would require a high-decent overclock to offset the performance. And 4 sticks won't post a high enough overclock.

I ordered a new system:

AMD Opteron 150 (socket 939)
2x1024 G.Skill (ZX 2-3-2-5)
DFI Ultra-D NF4 (lanparty...uh yeah...)
XFX-UDE7 (rev 2 copper) 7800 GT

i believe u made a right move

[jbmx4life]

can some people post their settings in the BIOS list form?? I see all of these A64 Tweaker settings and it is hard to copy them down in that format plus it doesn't show the "tref" setting right. Much appreciated. Thanks!

[DioSpada]

Hello....

I am buing this RAM....Can I have a Daily Use with an MSI K8N NEO2 and OPTERON 146 @ 275-280x10 CAS 2.5-3-3-5 with 2.9V ???

Are Stable this Ram at this frequenz ???

Thanks
Andrea...

Sorry for my english...I'm Italian...

[GSKILL TECH]

Hello....

I am buing this RAM....Can I have a Daily Use with an MSI K8N NEO2 and OPTERON 146 @ 275-280x10 CAS 2.5-3-3-5 with 2.9V ???

Are Stable this Ram at this frequenz ???

Thanks
Andrea...

Sorry for my english...I'm Italian...

2.9v is not good!
try lower to 2.7v

[GSKILL TECH]

can some people post their settings in the BIOS list form?? I see all of these A64 Tweaker settings and it is hard to copy them down in that format plus it doesn't show the "tref" setting right. Much appreciated. Thanks!

tomorrow i will bring my DC and post in here