The Official Opteron 939 Overclocking Thread

**dinos22** · 10-14-2005, 02:32 PM

Originally Posted by BLHealthy4life

Hi guys. Very stupid question I'm sure but after briefly skimming the thread here, I am still unsure the the Opterons are multi locked or not.

Are they able to go downward in multis?

Thanks!

they are multi locked upwards like all the other CPUs besides FX

**gbomb944** · 10-14-2005, 04:00 PM

Where can the the 148's be had for under 300 dogs? The only one I know of is 318.

**Rufus7** · 10-14-2005, 04:02 PM

146 CABNE0530APMW 2800Mhz 1,232Vc Aircooling TR XP90 Ambient 16Â°C 24H Prime Custom FFTs i.pl.

**dinos22** · 10-14-2005, 04:04 PM

i was doing some testing last night and noticed my hard drive temps were 22C heheheh i remembered your ones Rufus

great CPU btw

**Rohan** · 10-14-2005, 04:21 PM

Originally Posted by Slipknot

Thats not correct: Try this: Setup at BIOS to 1.535V. Then cinfigure with clockgen 1.45V, ya will see with CPU-Z that ya will get 1.58 to 1.616V

That worked with my Winchester, but with my opteron, the FID/VID controls are greyed out in clockgen. Anyone else notice this?

**Rufus7** · 10-14-2005, 04:24 PM

And here is the little Pic from the Temperature.

And with 2815Mhz 1,232Vcore is Prime still running since the 24Hour Screen at 2800Mhz.

Thx Dinos22,bought a new Cooler. TR SI 120 .Tommorow i will test the cooler.

**ozzimark** · 10-14-2005, 05:02 PM

Originally Posted by Rohan

That worked with my Winchester, but with my opteron, the FID/VID controls are greyed out in clockgen. Anyone else notice this?

yup, same problem for me. clockgen probably just has to be updated to support the opteron

**ben805** · 10-14-2005, 05:04 PM

Originally Posted by gbomb944

Where can the the 148's be had for under 300 dogs? The only one I know of is 318.

EWIZ sell it for 285

**Rufus7** · 10-14-2005, 05:05 PM

Originally Posted by ozzimark

yup, same problem for me. clockgen probably just has to be updated to support the opteron

Or you can Try with Systool v0.1 build 617.

**ixtapalapaquetl** · 10-14-2005, 05:12 PM

Hey all, I have a humble request (which you may obviously completely disregard). As more and more of us get Opterons, it gets harder to track everyones names. So even though you stated your stepping 8 pages ago, I have completely forgotten it by the time you post your awesome screenshots! Me too dumb too merember evybodie! Would it be reasonable to request that steppings/weeks be posted above any screenshots? No big deal if you think it is. Anywho, thanks for helping me (or sorry for the inappropriate imposition of my will, pick the one that works for you).

G.Skills are here!!! Tweaking for stability; once they're kosher I'll get some results up. Stupid nF3 board - total drag.

**gbomb944** · 10-14-2005, 05:46 PM

http://store.sun.com/CMTemplate/CESe...P&catid=131490

Depending on the mobo options I guess you could move a different 939 into the workstation. I've always thought Sun boxes look cool with the big logo on the side. The top is a little square but with some ccfl's behind that front panel it would be sweet.

**DrJay** · 10-14-2005, 06:04 PM

Got my Opty 148 to run 3Dmark'01 @ 3102Mhz on air cooling.

Not exactly a high powered video card though...

http://service.futuremark.com/compare?2k1=8753330

I attached a screen shot of CPU-z. This was not taken at the same time as the 3Dmark score. 3dmark needs at least 1.58 to stabilize.

Although 1.5Vcore will let me do everything in windows (files, surf, etc.)

Cabne 0528 gpmw

**ozzimark** · 10-14-2005, 06:30 PM

Originally Posted by ixtapalapaquetl

Would it be reasonable to request that steppings/weeks be posted above any screenshots? No big deal if you think it is.

i think it's a good idea.. though an even better one would be for someone who has the time and patience to keep track of it to start the "official oc database" with links to various speeds in different stepping categories

**RafaDel** · 10-14-2005, 06:56 PM

Perhaps dogsx2 may change his very first post to include an opteron rank with steppings, names, volts, bios, etc...

It shoud be a great improvement to this thread!

**mental_empathy** · 10-15-2005, 02:23 AM

Yep. my (aaustralian) opty 144 CABYE 0536 is doing 3ghz w/ 1.6V on an an8 ultra.

**NISCO PT** · 10-15-2005, 02:49 AM

Originally Posted by RafaDel

Perhaps dogsx2 may change his very first post to include an opteron rank with steppings, names, volts, bios, etc...

It shoud be a great improvement to this thread!

isso Ã© que era de valor meu amigo brazuka

i think that too.
i lost hours to find some post about steepings and results only in this tread!!!

**Riverna** · 10-15-2005, 03:48 AM

My final prime screenshot. apmw 0530 batch 0052 without heatspreader.

24/7 settings:

**Rohan** · 10-15-2005, 06:12 AM

Originally Posted by Rufus7

Or you can Try with Systool v0.1 build 617.

Thanks, Systool works great for changing VID on my opteron. I can get the max vcore now

**Riverna** · 10-15-2005, 07:03 AM

**el rolio** · 10-15-2005, 07:32 AM

hey Riverna, i think i love that wallpaper you got there on your screenshot? you mind posting it? or letting me know where i can find those and others? thanks homie

ps: nice oc, >1.4v pwns

**largon** · 10-15-2005, 08:04 AM

el rolio,
Look here.

**el rolio** · 10-15-2005, 08:09 AM

Originally Posted by largon

el rolio,
Look here.

why thank you dear sir.

see if i can find some widescreen lovin'

**gundamit** · 10-15-2005, 08:42 AM

Its really hard to stop playing with this CPU! I think I just nudged my way on to the XS 3DMark '05 top ten list.

http://service.futuremark.com/compare?3dm05=1323773

**mbm** · 10-15-2005, 08:47 AM

Cant find a opteron wallpaper?

**asianguy80** · 10-15-2005, 09:06 AM

Originally Posted by mbm

Cant find a opteron wallpaper?

haha that's what I was thinking.

Thread: The Official Opteron 939 Overclocking Thread

Thread Tools

Search Thread

Rate This Thread

Display

Buy a 144 for $895 and get a free sun workstation...

Bookmarks

Bookmarks

Posting Permissions