Write your Operton Stepping and results here![]()
Write your Operton Stepping and results here![]()
CABNE 0530 APMW
![]()
Phenom II 940 BE / ASUS M4A79 / HD5770 Crossfire
3770mhz CPU 2600mhz NB | DDR1040 5-5-5-15 | 900/1250
Opteron 146 0530APMW
Watercooled
Max OCCT stable for now 3050MHz 1.552V.
Max SuperPi32M 3100MHz 1.552V.
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
isnt 241c kinda hot?
nice [/omg] tag there
i'll try to do more when i get my mobo back, but here's a 3042mhz 1m shot. also.. there are no rules for the oc database. should we just assume that supierPI 1m is required for the screen?
chilled water, 30c load temps
144, CABNE 0530APMW
time is high due to single channel.
![]()
Got a fan over those memory sticks? No? Well get to it before you kill them
LOL! Changed that within seconds but you saw it heheheOriginally Posted by ozzimark
[/omg]
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
Would you people mind posting the 4 last numbers from batch nÂş?![]()
You were not supposed to see this.
No problem.
![]()
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
Very important is TMaxCase, from this is great OC !!
CABGE 0532SPBW
TMaxCase = 57C
Kde domov můj, kde domov můj?
Voda hučí po lučinách, bory šumí po skalinách,
v sadě skví se jara květ, zemský ráj to na pohled!
A to je ta krásná země, země česká, domov můj, země česká, domov můj!
More results please
Opteron 144 CABYE 0536 GPMW
![]()
![]()
Maxtcase = 59C
![]()
---
This might be a silly question but where can I find the maxtcase value?
CABNE 0530APMW
0193
maxtcase 65C
3000mhz OCCT Stable @ 1.52v
cooling "Naked" on Zalman 7700cu
I know the temps are crazy, but it is an Abit av8, and it reports the temps up to
20 degrees to high.
Also, I seem to need alot more volts to get super pi 32m stable than to be OCCT stable, any suggestions as to what may cause this?
![]()
X2 3800+ - IHS @ 2950 1.424v, 3000 1.488v
LDBHE 0601 TPMW "N" cooled w/ aquagate mini R120
eVGA 7900gt vanilla @ 625/1700 1.3vmod
DFI LanpartyUT nF4 Ultra-D (bios 702-1)
2 gb g.skill HZ 3:4:3:6 @ 250
Where in Europe can I find opteron CABNE?
Thanks.
...
memory timing causes it, play with the Tref, MAL and Preamble, etc.Originally Posted by fullup3
Core i7 920 D0 3844A717 4.40Ghz HT on @1.36v (LinX/Prime/3D stable), Corsair 850W, 12GB OCZ Platinum 1600, P6T Deluxe V2, EVGA GTX 285 SS, OCZ Vortex SSD 30GB x3 RAID0, HAF 932.
Water Cooling Setup: XSPC RX360, MCP355 + XSPC Res Top, Swiftech GTZ, 1/2" Tygon, Scythe S-Flex SFF21F push, 20mm yateloon D12SL-12C pull.
Opteron 148 CABNE 0528 GPMW 3.1Ghz @1.6v Prime Stable. Westy 37" LVM-37W3, DFI Venus 975, 2GB TeamX Cronus Micron, GSkill HZ, Sapphire X1900XTX, Zippy 700W, X-Fi Xtrememusic, 36GB Raptors x2 @Raid-0.
WC Setup: PA120.3 +Shroud, MCP655, STORM, MCW60, 1/2" Tygon, mini res, Yate Loon.
CABNE 0530APMW
maxtcase 65C
cooling - XP-90+papst
(system still under testing..)
Up to now:
-max OC (3140): http://valid.x86-secret.com/show_oc?id=45314
-max 1m SPi (27.5s):
![]()
Trouble --> can't get my OCZ PC3200 plt rev2 1:1 (max up to now ~285-290 with errors in OCCT)...need more tweaking![]()
:: w3520 cooled by EK supreme
:: Gigabyte EX58-UD5 //2x3gb PC12800 Gskill PI//GTX260//Corsair HX1000
Wow. I want opty 146!!!! GReat results
in maxtcase app 'search this forum' or CBI's -> mobility tab under P-StatesOriginally Posted by eR1k
---
just thought you guys should know, i'm collecting max >3hour prime95 stable speeds over at [H]
http://www.hardforum.com/showthread.php?t=888001
Got a fan over those memory sticks? No? Well get to it before you kill them
Opteron 148 CABYE 0528 GPMW 2.8 prime stable @ stock volts. 2.9 32m pi stable @ 1.325x113%. 3.0 1m pi stable 1.4x113% Max case temp 65. Big typhoon cooling. Have screenies posted in opty thread.
Main Rig
i7 2600k l Asus P8P67 l 2x2gb Gskill l GTS450 l Venomous X l XClio 680
anyone know a result of this stepping ==> 0536 VPMW ?
E6400@3.2GHZ | P5B deluxe |8800GTS 512MB | 2*250GB Hitachi + 500GB WD|
Aerocool masstige | Seasonic 600W |
MX510@450HZ | 24" LG 245WP
Cooled by: Swiftech storm - MCP 655 - Maze4/EK vodni block - Nexxos Dual Extreme
A64 3000+@2.9ghz // XP M 2500+@2.5ghz // XP M 2600+@2.6ghz benchable at 2.9ghz superpi 35s //
AMD opteron 146@3GHZ CABYE APMW batch 0076
Bookmarks