Quote Originally Posted by afireinside
His previous OC was done in single channel while his new setup is dual channel. Running in DC will require higher voltage to achieve the same clocks.
almost correct. i did not forsee switching to s939, thus one of my two bh-5 sticks is still at home in my parents computer. both results are single channel

with 3.26v and 260mhz in the yellow slot to give a few errors per memtest #5 pass, but not a lot. not the most scientific way, i tested each two times

Code:
Preamble	Test 1		Test2
4.0ns = 	48 errors	76 errors
4.5ns = 	55 errors	71 errors
5.0ns = 	54 errors	69 errors
5.5ns = 	33 errors	35 errors
6.0ns = 	54 errors	81 errors - tried a third time, memtest crashed
6.5ns = 	44 errors	77 errors
7.0ns = 	no boot		no boot
sorry about that, i lied. won't boot with 7.0ns.. though it seems that 6 isn't exactly reliable
either way though, seems like 5.5ns is the best in this case