The Official San Diego Overclocking Thread

**LenniZ** · 09-16-2005, 10:43 AM

Finally I got 3Ghz:

http://valid.x86-secret.com/show_oc.php?id=38494
1.64vcore
like 20 sec after that the system locked up..

What is max safe voltage for my 3700+ in short benchmarks? 3dmark, superpi etc. I'm on watercooling.

**STONKA** · 09-17-2005, 01:30 AM

0508EPMW Cooled Water IHS On !!

3GHZ at 1.4 Vcore !!

3050MHZ 1.48 Vcore !!

3.1 GHZ 1.52 Vcore !

Neext few Days a go to max OC

**STONKA** · 09-17-2005, 03:48 AM

With my old Sd3700+ make my Ram 2x512mb A-data pc600 2.5-4-3-3 max 305 FSB 1:1 Stable but with this SD is max 312 FSB , but i now this yet since last Test !!

Jep only 2.7 Vdimm

**SET** · 09-22-2005, 07:19 PM

0532 XPAW

Max SPi 1M with Air Cooling:

Grettings

**Dani** · 09-23-2005, 04:26 AM

Originally Posted by LANero

0530 XPAW

Max SPi 1M with Air Cooling:

Grettings

Atleast this with Air Cooling

:
0524XPBW

**Dani** · 09-23-2005, 03:13 PM

Here is the barrier to coldbug

**toreide** · 09-25-2005, 02:58 PM

I got a new 3700+ installed, forgot to write down the stepping, but from memory 0533**CW.

It' currently @ 290 x 10 " 1,62v, loadtemps 52C / 45C / 38C.

Still testing.

**afireinside** · 09-25-2005, 03:29 PM

On ice water. Close to 1.9V set in BIOS.

**bachus_anonym** · 09-25-2005, 06:38 PM

This thread is ONLY for showing results/screenshots. There's another thread for discussions. Thread cleaned!
Thank you.

**bachus_anonym** · 09-27-2005, 11:46 AM

My final SP2004/P95 results on phase change:

OS - Windows Server 2003
Mainboard - DFI NF4 Ultra-D
CPU - San Diego 3700+ 1MB L2 "CABGE 0515SPMW"
Cooling -

SP2004 (Prime95 GUI) SmallFFT @ 3311Mhz
SP2004 Blend @ 3311Mhz
Sandra benches @ 3311Mhz

**Viss** · 09-27-2005, 12:30 PM

First try with new chip. With the VX so i need the divider unfortunately, never ran them on this board/ram and something aint right. Mach (unmodded) is having a hard time keeping temps below zero under load. Quite pleased with first result though

**Dani** · 09-28-2005, 02:37 PM

UPDATE:
Still with Thermaltake Big Typhoon, room temp ~24ÂºC/75ÂºF
DFI nF4 SLI-DR
4000+ SD
2*512mb Mushkin RL XP4000

SP8M

SP32M, fluff

**kakaroto** · 09-30-2005, 03:19 PM

CPU: 4000+ 0505FPMW
MOBO: DFI nF4 SLI-D
MEM: G.skill PC4000 2GB HZ
COOLING: Dangerden TDX, Dtek 50Z and HWlabs Xtreme1

I thinks the temps are little high, strange this one is hotter then X2 3800 @1.5v..

**PcCI2iminal** · 10-08-2005, 09:09 AM

FX-57 CAB2E 0531RPMW

3300mhz 275 x 2-2-2-5 Sanmax 339WF
http://valid.x86-secret.com/show_oc?id=41618

**revenant** · 10-08-2005, 10:41 PM

here's my KAB2E 0532XPMW

**Viss** · 10-09-2005, 09:21 AM

2x256 9/10

**jmp571** · 10-14-2005, 09:06 PM

AMD 3700+ San Diego Core
ADA3700DAA5BN
KAB2E 0532XPAW
1303057H50533

2860Mhz 260x11 1.40v + 110%
Air cooled 38C full load, 28C idle

Images Removed... Sorry

**toreide** · 10-17-2005, 07:03 AM

Originally Posted by toreide

I got a new 3700+ installed, forgot to write down the stepping, but from memory 0533**CW.

It' currently @ 290 x 10 " 1,62v, loadtemps 52C / 45C / 38C.

Still testing.

Update!

I'm now stable at 2.9ghz with 1.568v. I'm now using ocz vx3200 memory on 5/6 divider @ 2-2-2-6. Gives me better performance than my 4800 @ 2.5-4-3-7 with no divider.

Graphics card is x800xl @ 452/560 mhz

Scores:

Aquamark: 83878 (12054-13783)
3Dmark05: 5902 (cpu 6327)
Sandra mem bw: 7140/7077
Sandra cpu arithmetic: 12189 / 4574 / 5927
Sandra cpu mm: 27642 / 29711
SuperPi 1m: 29,188
SuperPi 32m: 25m 49,125

**toreide** · 10-17-2005, 09:10 AM

**toreide** · 10-18-2005, 06:27 AM

Tweaked memory to try to improve performance. Settings as in screenshot. Loadtemps are also as seen here as I was running P95 torture test.

I have not had the time to run all of these test yet, but updated scores are added.

Scores:

Aquamark: 83878 (12054-13783) --> 84004 (12057 - 13851)
3Dmark05: 5902 (cpu 6327)
Sandra mem bw: 7140/7077 --> 7180/7116
Sandra cpu arithmetic: 12189 / 4574 / 5927 --> 12208 / 4576 / 5930
Sandra cpu mm: 27642 / 29711 --> 27653 / 29763
SuperPi 1m: 29,188 --> 29,109
SuperPi 32m: 25m 49,125

These settings have not been tested for stability. I will update as soon as I have.

**LenniZ** · 10-20-2005, 01:44 PM

Finally completed OCCT test:

I think this temperature is kinda high for my 3700+ on watercooling, or what?

**cadaveca** · 10-20-2005, 03:33 PM

not @ 1.6v just keep it under 40c.

**I(illa Bee** · 10-21-2005, 12:03 PM

This is prime stable for +12 hours, I wanted to play some Bf2 after than so I stoped it...

This is shootin for a high, it ran windows just fine, but anything intense like BF2 of prime crashed right away....

Sorry about the [H]ard|OCP stuff, i orignally posted over there...

**toreide** · 10-25-2005, 07:05 AM

Not tested for stability yet. Seems very responsive to voltage. Wish I had some eXtreme cooling.....

**umbre_tombetoil** · 10-26-2005, 06:24 AM

Some results of my 4000+ SD 0515 SPMW (cpulloverclock SD) on air (XP120 + Enermax UC12FAB 12V) :

max s-pi 1M :

s-pi1M 28GP :

max cpu-mark :

max screen :

2.8Ghz stability :

Have some problems with my DFI motherboard, probably best results coming soon

(until I get an opty with CABNE 0528 stepping ...

).

Thread: The Official San Diego Overclocking Thread

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions