NF2 UTT BH5 - Highest stable clocks - REPORT IN & DISCUSS !!!

[gsan]

I have every suspicion its a memory controller setting that is NOT accessible by the user.

I have 3200Gold BH5, old BH5, and UTT-CH.

I cant get 1T past 200-210 with any BH5, and barely get 225 2T.

The UTT-CH on the other hand, 1T 250Mhz x10 8,2,2,2.0 @ 3.45Vdimm no problem. So the memory controller and CPU are not the issue, the interaction of the BH5 and bios are the issue. This is on DFI Infinity, Vmod'd up the wazzu, and a great 2600+ mobile.

yours ocz 3200gold bh5 is utt chip? i tried many modd. bios but the result still same, the ram does not allow me to run 201 @ 2-2-2-5, 1T.

[uwackme]

No my OCZ 3200 Gold is new UTT-BH5 (according to OCZ) and the ValueVX I bought was the same (but a little slower than the gold in use), and I have OLD BH5 from years ago, and I have UTT-CH5 from Twinmos.... Twinmos 3200 SP "AA4T" with -44D chips on them.... 4 512M sticks. This UTT-CH is in my NF4 right now, 250Mhz x11 4x512M sticks 2T 8,2,2,2.0, but the best pr did 250Mhz x10 1T 8,2,2,2.0 flawlessly totally stable in my Infinity NF2.

All the BH5 hates the NF2 board, best result so far is ONE stick of old BH5 in single channel....252Mhz 2T. 225-235Mhz is the max I can get the BH5 stuff on NF2.

Tell your freind to either get 2x512M sticks of REAL "VX" which are UTT-CH chips, or get 2x 1G sticks of Mushkin....

Mushy 1G sticks

These amazingly do 235Mhz dual channel 2Gigs! 1T in the Infinity @ 2.8Vdimm.

[gsan]

No my OCZ 3200 Gold is new UTT-BH5 (according to OCZ) and the ValueVX I bought was the same (but a little slower than the gold in use), and I have OLD BH5 from years ago, and I have UTT-CH5 from Twinmos.... Twinmos 3200 SP "AA4T" with -44D chips on them.... 4 512M sticks. This UTT-CH is in my NF4 right now, 250Mhz x11 4x512M sticks 2T 8,2,2,2.0, but the best pr did 250Mhz x10 1T 8,2,2,2.0 flawlessly totally stable in my Infinity NF2.

All the BH5 hates the NF2 board, best result so far is ONE stick of old BH5 in single channel....252Mhz 2T. 225-235Mhz is the max I can get the BH5 stuff on NF2.

Tell your freind to either get 2x512M sticks of REAL "VX" which are UTT-CH chips, or get 2x 1G sticks of Mushkin....

Mushy 1G sticks

These amazingly do 235Mhz dual channel 2Gigs! 1T in the Infinity @ 2.8Vdimm.

your experiece give me the hope with the GH.