2x1GB/1x1GB OC Database

[skipio]

Thanks! I'm much happier with this memory than 4x512 UTT.

Running 10 multi, the CPU MHZ helps out a bit.
HTT multi is set to Auto
Not sure of all my timings other than Trc-10, I'll try to get a tweaker shot tonight for you. I'm sure being able to tweak with the DFI helps out a little also, though I'm starting to get frustrated with my board. It's starting to hang at boot from time to time, cold boot or not.

I have an Asus A8N SLI Premiun and its less tweakebale, but does the job i want it to do which is basically run my X2 4400+ @2.5GHz with the 1Gb G.Skill La running at either 1:1 @250 (cpu mult 10) or 1:1 @278 (cpu mult 9).

I am looking to upgrade to 2Gb and thinking to get ballisitix 2Gb. Still trying to establishing what hit i'll get dropping to 3-3-3-8 from 2.5-3-3-7 at those speeds. Hence the questions.

[wickedld9]

I have an Asus A8N SLI Premiun and its less tweakebale, but does the job i want it to do which is basically run my X2 4400+ @2.5GHz with the 1Gb G.Skill La running at either 1:1 @250 (cpu mult 10) or 1:1 @278 (cpu mult 9).

I am looking to upgrade to 2Gb and thinking to get ballisitix 2Gb. Still trying to establishing what hit i'll get dropping to 3-3-3-8 from 2.5-3-3-7 at those speeds. Hence the questions.

Right on, I'm getting ready to head home and can run some tests on the 9 for you.
BTW, I was able to complete 10 passes of memtest overnight 270MHz 3-3-3-8-1t 2.7v. I'll up it tonight and see where I end up. I wanted to get a good baseline and try to tighten things up a bit. I've been able to memtest 2.5-2-2-6 up to ~240 2.7v so that got me started testing where I will get the best performance. I'll start up another thread once I get more testing done.

[CP-Geek]

These things are flying!

I was bored after work (who isn't...) so I sat down to play with 64-tweaker a bit.

Check out the result

I used to run this board in 11x255 with UTT and BH-5, and the same 2.8Ghz was the goal. It seems that 254 with 2.5-3-2-6 1T is the roof, not even SuperPI 1M runs in 255 Mhz. But hey, under 30 sec in 1M and under 5.30 in 8M is not bad from a 2GB set! (I was this happy at x-mas -76, I was 6 yrs... )

Oh, it's Corsair 2048 PC3200CL2 v1.2 - 4000+ - DFI nF4 Ultra-D, Corsair's get 3.0 volts juice.

EDIT: I ran the 32M also, no problems!

[nugzo]

These things are flying!

I was bored after work (who isn't...) so I sat down to play with 64-tweaker a bit.

Check out the result

I used to run this board in 11x255 with UTT and BH-5, and the same 2.8Ghz was the goal. It seems that 254 with 2.5-3-2-6 1T is the roof, not even SuperPI 1M runs in 255 Mhz. But hey, under 30 sec in 1M and under 5.30 in 8M is not bad from a 2GB set! (I was this happy at x-mas -76, I was 6 yrs... )

Oh, it's Corsair 2048 PC3200CL2 v1.2 - 4000+ - DFI nF4 Ultra-D, Corsair's get 3.0 volts juice.

EDIT: I ran the 32M also, no problems!

Thats pretty damn nice. How about some sandra bandwidth screenies. What does memtest86 show also for bandwidth. What kind of price tag on them jewels?