2x1GB/1x1GB OC Database

[Blue078]

i only need 250 so if either of them does that at reasonable timings i'd opt for those over the out of stock crucial

Ballistix Z503's are in stock at Crucial, looks like even the Tracer is in stock

[Waffles]

Ballistix Z503's are in stock at Crucial, looks like even the Tracer is in stock

iits like friggen $400 tho lol

[skipio]

Lood007

I thought
Trc = Tras + Trp
then
Trfc = Trc + (2 - 4)

But neither you or sierra_bound seems to be using this in their A64 Tweaker, why is that? Am i missing something? Or is the above wrong?

Also how come noone is using Everest or Sciencemark 2 or something else that benches latency? From what i've seen DDR416@ 2-2-2-6, DDR500@2.5-3-3-7 and DDR560@3-4-4-8 have within 4% the same latency yet the bandwidth difference is about 20-22%.

[wickedld9]

Lood007

I thought
Trc = Tras + Trp
then
Trfc = Trc + (2 - 4)

But neither you or sierra_bound seems to be using this in their A64 Tweaker, why is that? Am i missing something? Or is the above wrong?

Also how come noone is using Everest or Sciencemark 2 or something else that benches latency? From what i've seen DDR416@ 2-2-2-6, DDR500@2.5-3-3-7 and DDR560@3-4-4-8 have within 4% the same latency yet the bandwidth difference is about 20-22%.

No screenshots but my Everest Read is 7418MB/s, Latency is 41.5ns @280MHz 3-3-3-8.
Hope this helps.

[skipio]

wickedld9[/SIZE]]No screenshots but my Everest Read is 7418MB/s, Latency is 41.5ns @280MHz 3-3-3-8.
Hope this helps.

wickedld9 VERYimpressive! How do you manage that? What is the cpu multiplier? htt multiplier and memory ratio?

If i try fsb 278, cpu multiplier 9, htt multiplier 3, and memory 1:1 at 278@2.5-3-3-7 with trc=12, trfc=16, 1T i only get write 2683, read 6363 and latency 45.4ns.
I suppose it is because you are running on a higher cpu multiplier? And because of the tweakeability of the dfi?

[CP-Geek]

One entry more, also PM'd.

2x1GB Corsair CMX1024-3200C2 v1.2
Infineon BE-5 (Not sure, HS's on place, got these today)
2.5-3-2-6 1T @ 250MHz @ 3.0V
32M Shot and Validation

[Blue078]

One entry more, also PM'd.

2x1GB Corsair CMX1024-3200C2 v1.2
Infineon BE-5 (Not sure, HS's on place, got these today)
2.5-3-2-6 1T @ 250MHz @ 3.0V
32M Shot and Validation

Nice 2.5-3-2-6 1t

[wickedld9]

wickedld9 VERYimpressive! How do you manage that? What is the cpu multiplier? htt multiplier and memory ratio?

If i try fsb 278, cpu multiplier 9, htt multiplier 3, and memory 1:1 at 278@2.5-3-3-7 with trc=12, trfc=16, 1T i only get write 2683, read 6363 and latency 45.4ns.
I suppose it is because you are running on a higher cpu multiplier? And because of the tweakeability of the dfi?

Thanks! I'm much happier with this memory than 4x512 UTT.

Running 10 multi, the CPU MHZ helps out a bit.
HTT multi is set to Auto
Not sure of all my timings other than Trc-10, I'll try to get a tweaker shot tonight for you. I'm sure being able to tweak with the DFI helps out a little also, though I'm starting to get frustrated with my board. It's starting to hang at boot from time to time, cold boot or not.

[skipio]

Thanks! I'm much happier with this memory than 4x512 UTT.

Running 10 multi, the CPU MHZ helps out a bit.
HTT multi is set to Auto
Not sure of all my timings other than Trc-10, I'll try to get a tweaker shot tonight for you. I'm sure being able to tweak with the DFI helps out a little also, though I'm starting to get frustrated with my board. It's starting to hang at boot from time to time, cold boot or not.

I have an Asus A8N SLI Premiun and its less tweakebale, but does the job i want it to do which is basically run my X2 4400+ @2.5GHz with the 1Gb G.Skill La running at either 1:1 @250 (cpu mult 10) or 1:1 @278 (cpu mult 9).

I am looking to upgrade to 2Gb and thinking to get ballisitix 2Gb. Still trying to establishing what hit i'll get dropping to 3-3-3-8 from 2.5-3-3-7 at those speeds. Hence the questions.

[Blue078]

iits like friggen $400 tho lol

Yea and FX57's are about $1100