Results 1 to 25 of 115

Thread: OCZ PC3200 Gold new BH5 die + DFI NF4 SLI-D Part2

Threaded View

  1. #1
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,651

    Cool OCZ PC3200 Gold new BH5 die + DFI NF4 SLI-D Part2

    New results on different cpu for 2x 512MB OCZ PC3200 Gold with the new BH5 dies. Original results at http://www.xtremesystems.org/forums/...ad.php?t=58374

    1. changed cpus from 3500+ CAA2C Clawahammer to 3200+ winnie
    2. changed bios from 310 official to 414-3 beta bios allowed me to use Bank Interleave Enabled
    3. changed psu from 580W Topower 686P6 to 650 Silverstone PCI-E SLI psu
    4. change Forceware drivers from 76.10 to 71.89WHL
    5. change everest home from 2.00.292 beta to 2.00.323 beta

    The product link is at http://www.ocztechnology.com/product...l_channel_gold



    System:
    3200+ CBBHD 0445 VPMW water cooled
    DFI NF4 SLI-D 414-3 official bios
    2x eVGA 6800U PCI-E SLI mode with 71.89WHL drivers
    120GB WD 1200JB
    Pioneer A05 Burner
    650W Silverston Zeus ST65ZF PCI-E SLI psu
    WinXP PRO SP2

    - note SLI mode will probably reduce cpu related performance slightly so take that into a/c with the benchmark results.

    2x 512MB OCZ PC3200 Gold new BH-5 die dual channel kit

    @10x 260mhz 2-2-2-5 7-16-3-3-1-2 at 3.6v


    chipset = 1.6v
    LDT = 1.5v
    LDT 4x

    CPC = Enabled
    CAS Latency(CL) = 2
    RAS to CAS(Trcd) = 2
    Min RAS# Active time(Tras) = 5
    Row Precharge Time(Trp) = 2
    Row Cycle Time(Trc) = 7
    Row Refresh Cycle Time(Trfc) = 16
    Row to Row Delay(Trrd) = 3
    Write Recovery Time(Twr) = 3
    Write to Read Delay(Twtr) = 1
    Read to Write Delay(Trwt) = 2
    Refresh Period (Tref) = 0648
    Write CAS Latency(Twcl) = Auto
    DRAM Bank Interleave = Enabled
    Skew = AUTO
    Skew Value = 0
    DRAM Drive Strength = Level 3
    DRAM Data Drive Strength = Level 1
    Max Async Latency = 7ns
    Read Preamble Time = 5ns
    Idle Cycle Limit = 256
    Dynamic Counter = Enabled
    R/W Queue Bypass = 16x
    Bypass Max = 7x
    32 byte Granularity = Disable(8burst)

    Sandra 2005 Lite
    Buffered = 7,355 / 7,293
    Unbuffered = 3,573 / 3,781

    Everest Home
    Read = 7,669
    Write = 3,103
    Latency = 33.9 ns

    Pcmark04 = 4,926
    Pcmark04 Memory = 6,651

    Hexus Pifast = 45.19s

    SuperPi
    1M = 32.082s
    8M = 5min 46.285s
    16M = 13min 08.479s
    32M = 28min 37.046s

    3dmark2003
    @425/1100 stock speeds

    Last edited by eva2000; 05-02-2005 at 02:58 PM.
    ---

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •