DFI NF4 vcore and possible vdimm mods

[Malves]

Saaya requested vcore mod for this board. So, here it is. Also, that could be vdimm mod, but I was told this board doesn't need it. But if someone is interested in using the 3.3v rail, instead of the 5v rail, for vdimm, here is the possible mod. If someone tries it, please report back with results for vdimm.

Vcore: 50k trimmer via pin 10 of ISL6559CB to ground (pin 15). Lower resistance for more vcore.

Vdimm: 50k trimmer via pin 6 of LM358 to ground (pin 4). Lower resistance for more vdimm.

For vdimm, try soldering the trimmer and check to see if it works. If it doesn't then get back to me and i'll give you other ideas to try. You can use other grounds instead of pin 4, since it looks like it's a lil tight there.

As usual, do it at your own risk.