Quote Originally Posted by felix_w View Post
I believe the microSW-X comes in two versions, the 40mm long and the 60mm long.

If i am correct, the widht does not exceeed 15-16mm, so the short version and a custom cut copper plate might do the job...if the space between the caps exceeds 60mm, it might be a tight fit for the long version also...

Contact Watercool, to give you exact dimensions and maybe a 1:1 drawing like the other ones they have in their download page. Print, cut and do some test fitting...

One more thing, the copper plates come in two versions one 80x30mm with 2 mounting threads for the 40mm version and one 100x40mm for the 60mm version...it seems that the hole distance on the PCB might be covered only by the 100x30mm plate...
Thanks I spent an hour and a half googling without noticing your post, and found some of this info, but not all. I think the only backplate that's useful here is the G3 one, so that complete set is probably the easiest (if it works). I would think one can mod the G2 backplate to fit the 60mm version, but if it's not needed... why bother :p The G2 is definately long enough (I don't get the 30mm/40mm part... the plates are not 30mm/40mm wide? According to Heatkiller they're 14.5mm, and the block itself is 16.5mm wide).