MaximusIV-Extreme Thread

[donmarkoni]

jaja yes for sure you should have a wallet plenty of money.

Ahah now I get it whay you tryied to say. Yes you are right, not all the cpus are exactly the same. But well... everyone has its own ideas.

Ok well I will not worry that much, is all I can promise
I will lower the VccIO so, and there is something else that could be lowered?

Would be great if you could post your bios settings if you cpu is similar to mine, may be I can try some of your settings if you don't bother.

Thanks!

PD: Before I forget I add your account to my messenger, if you use it often we can talk there too.
Thanks for your help again.

Nothing else to lower, just VccIO. If it works at default - good, if not - raise it again.

BTW, I did some tests and discovered that lowering all voltages except vCore does not lower CPU temperature by a single degree. If anyone's findings differ, please share.
All voltages were lowered by 0.05V except CPU PLL which was lowered by 0.1V.
CPU was at 4.8GHz 1.41V LLC 100% (+0.02V load) HT ON; RAM at 1600MHz 7-7-7-20-1T, LinX w/AVX gave 107GFLOPS, room temperature 24°C w/AC, two hottest cores were always at 73/74°C.

P.S. I'm retesting my OC settings with SP1/AVX, and when I'm done - I'll share.

this is my result for 2600k + Maximus 4 Extreme + 2x2GB 2133Mhz RipjawsX

5.0 @ 1.35
http://valid.canardpc.com/show_oc.php?id=1879393

Hmm... LinX bar turned purple. It means that linpack was closed before finishing.