Thanks. I will get the revision number after work today. I saved a profile for 225, but it wont boot when I load it. Only way to repeat this is to start at 221bclk, boot to windows, restart and set 222 and boot to windows, and repeat this process going up 1 at a time until I get to 225, otherwise I get A1 A2 or A5 code (cant remember) and no boot. Once at 225 I cant reboot the pc and it will go to windows fine or even turn it off and boot, but if I load defaults then have to do this process again. I had to do this on the rex3 to get from 115 to 222, but lost 3d performance on rex3 and would not reboot, this board doesnt lose performance. The setting Low Droop for QPI doesnt work great, with 1.50v set in bios it still droops to 1.417v with DMM, at lower voltages like 1.4-1.41 the droop is much less, gives 1.34-1.355 real.
I kept trying last night but that was the only way it worked. I will try my 920 this week and see how that chip does because it is mych better for high bclk. Tried with the 950's and they wouldnt boot at 225, only this 930 so far.
Edit: I goit home and was able to boot a higher bclk without having to go through that process, but its not consistant. Will keep working on it tonight.
Reply With Quote
Bookmarks