Hello to all,
I have found this link:

http://www.vr-zone.com/?i=759&s=1

Vdimm Mod


This is a guide to voltage modding your Abit AN7 memory voltage. Although it gives 3.2v maximum, some may crave more.

Look for the resistor R316 as shown below.





Unsolder the resistor. Replace it with a 800 to 1K ohms resistor. It can be an SMD resistor, a normal resistor or a variable resistor. Increasing the resistance increases the voltage, so 0 ohms means no increase. Take note that it will only go as high as the 3.3v rail. To get high voltage, you will need to mod your 3.3v rail as well.



... for the vagp mod still null...