Unplug your 4-pin auxilliary power connector and see if she fires up. If she fires up but still doesn't POST, quit wasting your time and submit an RMA. Make sure you post a mobo review on Newegg, and add to the posts

here: http://hardforum.com/showthread.php?t=1524927

and here: http://www.overclockers.com/forums/s...d.php?t=645911
I Unplugged the 4 pin connector. It turns on LED and everything but no POST. Is there something wrong with these boards and 6 core processors? I just skimmed the thread because I need to go to work in a bit but from what I understand something about vcore and too much and yeah.. (Sorry)

I'm using the same cooler with this board and used the stock MSI bracket since I didn't want to take the board out of my case. When you took the MSI bracket off and replaced it with the H50 bracket, did you notice any padding on the MSI one? I've removed a couple brackets and don't think I saw any kind of padding, so I doubt that's the reason.

So what happens when you press the power button? Do lights come on, fans turn, or any beeps?
Double check that all your power connections are secure. If that doesn't work you should troubleshoot using this for reference.
There's padding I just checked. I checked my connections and everything is tight. I even thought that maybe I am putting too much pressure on the CPU so I loosened the screws, but that wasn't the problem. I did the troubleshoot guide, tried booting with one stick of RAM 1 video card etc.. and the thing won't POST. (Thanks for the guide though)

the stock base bracket has the rubber pads stuck on the base.

Have you short the bios reset jumpers just at the end of the pci-e display socket, that my just do the job, if not, like MassiveOverkill said, stop wasting time and RMA it back, before the dead line.
By shorting the bios reset jumpers you mean clearing the CMOS right? I just tried it and no luck.

So it looks like I have to RMA to MSI. I didn't buy it off newegg by the way. I bought it off craigslist off some lade for $250 CDN for both the 1055T and the mother board it was also brand new and sealed but no receipts. Everytime something good happens to me something bad happens again lol... I did get the H50 off ncix for $59 CDN which is really low for my area.

This is my first mATX build and I haven't built a PC for 2 years. Having it fail on the 3rd week and on top of that I'm broke makes me feel confused, angry and sad at the same time.. lol.