Quote Originally Posted by Gimmpy224 View Post
seeing all these excellent dyes makes me wish my rig was up and running (gg funding).

I am getting pretty anxious to see some temp results after a few months of running these though ^_^.
The temperature shouldn't be a problem with the Anchor Water Wetting Agent and the dyes. There might be a few degrees difference because of the use of the dye but I don't expect a huge difference although I used a little more than 1ml (+/-1.1ml) for 520ml DeMi water.

I used a little bit to much UV Yellow/Green-Green dye to have it look green with daylight and it was already to much before I realized that I should add more UV Green to look more green with daylight.

I'm going to leave it like that for some time to see if the 2% Anchor Water Wetting Agent can keep my loop clean with so much dye.


I want to get this straight the Anchor Water Wetting Agent is a totally different product than Water Wetter. There shouldn't be a film layer that is going to make temperatures worse over time like the Water Wetter on your watercooling blocks and if it does so it's going to be easy to take that away with just pure water. But yes, it's better to be safe than sorry and wait for the results after a few months running this mixture in my loop.


If all goes well it should keep my watercooling loop clean and help against staining and it shouldn't be a problem to use mixed metals in the loop.