
Originally Posted by
massman
Technically yes, but it's possible that the PCB design is a bit different from the GTX260 (hipro's modifications). So what you need to do is to re-measure everything.
The vmem ic is the uP6205B; FB is pin 8 and there's a soldering point very near, almost next to the pin.
As for the Vgpu: the hardmod will indeed work, but you'll have OVP no doubt. I hope MSI lets you use the utility Snot_aap coded for the GTX260 as it should work on the GTX275 as well. Then you have no OVP and are able to set the Vgpu upto 1.6 through the VID table.
Bookmarks