Results 1 to 6 of 6

Thread: Q9550 system Power Consumption Test

Threaded View

  1. #1
    Registered User
    Join Date
    Jan 2006
    Posts
    88

    Q9550 system Power Consumption Test

    though i would run a few tests and share the results with everyone on here. i purchased a power meter: http://www.maplin.co.uk/Module.aspx?ModuleNo=223573

    and gave it a whirl on my system:

    Media PC Powermeter tests:

    Power Meter Used was from Maplin's, a Nikkai Power code N67FU


    system:

    Q9550@3.4ghz (stock vid 1.2500v used) (speed step enabled) (idle vid = 1.1000v)
    4x1gb corsair xms3 dhx (1600C7) @ 1280mhz 6-6-6-18 1.80v
    Gigabyte P35T-DQ6 rev1.0
    cpu settings 400 x 8.5 - speedsteps to 400 x 6.0 Load Line Calibration disabled
    core contact freezer + scythe sflex 1600 (full speed)
    2 x scythe sflex 1200 (full speed)
    gainward gtx260 216 GS 55nm (clocked to 700core, 1200ram, 1440shader)
    wd black 1tb
    pioneer dvr216D
    corsair HX520w psu

    (all are peak readings obtained)

    System Powered Off = 2.4w


    Idle in windows doing nothing, no HDD activity, speedstep clocked to 2.4ghz = 108.2w


    LINX (linpak) stress test speedstep gone to 3.4ghz = 222.7w


    GPU gone to 3d clocks when occt loaded up but no stress testing = 128.2w


    OCCT GPU test started full screen (1360x768 rez 52fps average) = 271.8w


    OCCT GPU + LINX run at the same time = 383.7w



    as the results show, going from idle to max gpu load is around 170w difference, if i was running sli with 2 cards add another 170w and that makes it nearly 554w + a bit more since gpu probably uses more than 170w since when idle its probably sucking up a few more watts. take into account 80% psu efficiency and iv got around 445w actual pull from the psu, pull from the mains is always higher due to efficiency loss. so its possible a hx520w psu can power sli rigs.

    idle consumption i thought was impressive general web browsing etc didnt even get to 110w.

    by the way people this is done on uk 240v mains.

    i used linx (linpak) and occt gpu tests since they are the most extreme tests out there for gpu and cpu.

    peak power pulled from the wall socket was as shown above 383.7w the pc itself is pulling from the powersupply taking into account 80% efficiency
    = 383.7 x 0.80 which = 307w pc is pulling from the power supply itself.


    hope this info helps out others looking for power supplies.
    Last edited by Cyber-Mav; 06-17-2009 at 06:58 AM.
    Opteron 170@ 265 x 10 @1.375v
    Asrock 939N68PV-GLAN, GEIL 2gb 400mhz ram
    8800GT accelero s1, XP X64. Antec p182 mini
    velociraptor 150gb, Corsair 620w

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •