MA790X / MA790XT-UD4P 790X bugs fixes etc etc.....

[jamz1155]

Dont go overboard on the Ram with volts.. Set it to where the Bios is correct for yor rated volts ,while trying to trouble shoot.

The RAM is rated for between 1.85 to 1.95 volts according to the packaging. That's the range in which I've been testing

Set the Ram mode for speed and see what the setting report on Auto timing?

That's the other weird thing, this board doesn't obey the SPD on the sticks at all. If I set the timings to auto, it runs the RAM at 11-11-11-27, or something like that (also not stable at 1600mhz). Which is weird because, for those of you who've seen the BIOS on this board, it displays the SPD values in a column on right right side of the settings.

Maybe try Raisng the TRC value to something like 34 or even 42 or even higher.

I'll try that, although it's pretty high already.

It may be that the Mushkin timing dosnt like the Mobo.

Also use Memtest make shure you dont have errors.

if you get errors right away , send the Ram back.

I'll try that too, stand by...