NF7 Voltage read points

[ricjax99]

I think i have this right but could someone confirm what the 3.65V reading is. I'm inclined to believe that it's the +3.3V dual, as it shows similar. And if someone could point me to the +5V rail reading.

I have to resort soley to multimeter at the moment my h/w monitor/bios readings are way out only one thats about right is vcore.

Bios settings:

VCORE = 1.93V
CHIPSET = 1.6V
VDIMM = 2.8V (10K VR)

h/w monitor/bios readings (under load):

+12V = 11.67~12.10V
+3.3V = 3.25~3.34V
VDIMM = 2.99V~3.06V
VCORE 1.84~1.94V

The readings on the board (pic), are rock solid apart from the +12V and +3.3V(and thus vdimm) which drop under load.

3.44V drops to 3.36V (and vdimm to 3.10V)
12.40V drops 12.04V

The PSU is an unmodded Enermax EG465AX-VE-(G) 460W 35A(+5.0), 35A(+3.3V) and 33A(+12V).


***WARNING, WHEN CHECKING THE +12/VCORE MOSFET BE CAREFUL NOT TO SHORT THE TWO LEGS THIS WILL KILL YOUR BOARD 100%***

Heres the pic: