MA790X / MA790XT-UD4P 790X bugs fixes etc etc.....

[gOtVoltage]

I dont have a volt monitor, that i could use, but where on the mobo would you take the reading from to confirm?

Also if the nb volts are working... I would also tend to agree with dave burt as to what i ve seen, i ve been rock solid up to 3.5ghz, 3 core/4cores doesnt matter, but anything above, i start to get page fault in non paged area bsods.. i have my nb at 2200mhz, I do have 8gb of valueish mushkin ram, but timings are loose, and not oc'd, If it were other bsod's it would make sense , my stability doesnt seem to fluctuate on nb vid.. with I have in bios at +.200v so an effective 1.4 amds safe max.. I ll play again systematically this weekend maybe and see what i can come up with, could be my nb is taxed at 2200?

Its not maxed,, I have Done 2400 and My NB does 2800+ @ 1.45vid on two other Mobos.

On THIS MOBO even with +.200,,,250,,.300 = 1.5vid it wont do crap on the NB .. i dont know hwer to look but there is something going on . It may be volts or even Ram related ..

Im still playing around with the Nbvid to see if i can see Temp fluctuations when i raise and lower it. So far i it dosnt matter what i do it seems to stay the Same.

This Same 720 can do 3700cpu/NB2800+ @ 1.55vid with no erors/bsod's on the M3A79_T

I know the M3A VId works 100%. You can see it in the Nb Speed at any speed.

Somethings happening to keep the NB @ 2400 and lower.