Yes not as good as other i7 920 D0 steppings in terms of vcore needed - but runs alot cooler than alot of D0 even with high vcore applied

Pushing my i7 920 3851A368 D0 to the max with HT enabled now. Seems cpuz validation is higher than my i7 920 3836A756 C0 when HT enabled - 4710mhz vs 4669mhz and D0 also has slightly higher max HT Enabled Super Pi 32M cpuz speed - 4685mhz vs 4618mhz. Only difference is for C0 tests I used single 8800GT while D0 was using 2x HD4870x2 Crossfire installed.

Like my C0 stepping, this D0 seems to handle high vcore with relatively low temps !!!

System:


From http://i4memory.com/111898-post6.html

i7 920 3836A756 C0 TRUE120 Air
  • Max 32M Super Pi = 4473Mhz HT enabled / 4652Mhz HT disabled
  • Max Validation = 4473Mhz HT enabled / 4769Mhz HT disabled


i7 920 3836A756 C0 EK Supreme LT / Feser480 H20
  • Max 32M Super Pi = 4618Mhz HT enabled / 4680Mhz HT disabled
  • Max Validation = 4669Mhz HT enabled / 4744Mhz HT disabled


VS

i7 920 3851A368 D0 EK Supreme LT / Feser480 H20
  • Max 32M Super Pi = 4685Mhz HT enabled / TBD HT disabled
  • Max Validation = 4710Mhz HT enabled / TBD HT disabled