Gigabyte GA-MA790FXT-UD5P Thread

[dehx]

Dont have a cam handy, but i'll type you a little note...

This is exactly what I use...

* ACC = Disabled
* Multiplier = 19.5
* Bus Speed = 200
* Motherboard = Gigabyte GA-MA790FXT-UD5P
* Memory Speed and Timings = 2 x 1GB 1333Mhz DDR3 @ 8-8-8-18
* NB Frequency = 2.8Ghz
* HT Frequency = 2.6Ghz

Voltages

* NB voltage control = +0.1V
* SB/HT volatge control = +0.1V
* NB/PCIe/PLL voltage control = +0.1V
* DDR VTT voltage control = Normal
* CPU NB VID control = +0.250V
* CPU VID control = +0.250V

I use the 2 blue banks, when I first used them and saw my memory was running at 64bit I thought, how is this possible, but then I saw the setting for ganged and unganged

I take it you dont need any info on what that means..?

Nah, I'm good on the ganged/unganged. I'm going to try your settings now.