Quote Originally Posted by Leeghoofd View Post
This 1.5 setting overvolts mate (around 1.75ish now): so try eg 1.6 and try go down then 1.52 is the lowest you can go as 1.5 and AUTO overvolt



He got also 105 TJcasemax set... but might be a good idea to verify the mount, reapply the thermal paste , check IHS of cpu and verity the cooler flatness...

Thanks, I wasn't aware of the CPU PLL quirk.
Did some quick 30 min testing and have it relatively stable with the following tweaks:
FSB: 488
CPU Voltage: 1.35000
CPU PLL 1.52
FSB Termination Voltage: 1.34

The rest is the same as before. I'm not too worried about temps at this point, since if it gets unstable when it's hot, watercooled+summer I expect it to hit the same temps as I'm a silence nut.

Heading out for the day so I will let this thing Prime and hopefully will have a nice screenie when I get back! I'm enjoying this board more than my M2F

If I can hit 8x500 24 hour stable, then I'll move on to testing my Q9550 (also a C1 unfortunately).

Is TJcasemax not supposed to be 105 for these chips??