I dont know why so many people seem to be having problems with this new bios from ASUS 1201 I am having zero issues with this bois, not having to add extra voltages, same stability, same temps ect., ASUS would not release an unstable bios, All I can think of for your issues is you are lashing your bioses with unstable and not fully tested systems.

The key to this is never ever flash your bios, no matter which method you use with an overclocked system, I always put the bios on a USB stick, then shut down the PC, clear the bios using the jumper on the board, then boot back into the bios, set the memory voltage to mid range of the rated, ie if its rated 2.2v-2.4v then I set 2.3v, save and exit, and then on restart hit Alt+F2 to start EZFlash, after flashing is finished, I follow exactly the same procedure again, clear the bios using the jumper on the board, and then enter again and set it all up, never had any problems with any of the bioses.