Leeghoofd, can you help me out?
E8400, OCZ PC-8000

Working perfect with the following settings (3.8GHz), but I want to hit the magic 4GHz

By only upping the FSB to 445 and 1.375v core, I can boot, but get Orthos failures within minutes
500x8.0 results are the same, the memory isn't the bottleneck (tested it @500MHz)

What other setting could I try?


CPU Ratio Setting: AUTO
FSB Strap to Northbridge: AUTO
FSB Frequency: 423
PCI-E Frequency: 101
FSB Strap To North Bridge: AUTO
DRAM Frequency: DDR2-847

DRAM CLK Skew on Channel A1: AUTO
DRAM CLK Skew on Channel A2: AUTO
DRAM CLK Skew on Channel B1: AUTO
DRAM CLK Skew on Channel B2: AUTO

DRAM Timing Control: Manual
Timings: 5-5-5-15, tRFC 55, all other on AUTO
DRAM Static Read Control: AUTO
DRAM Read Training: AUTO
Mem. OC Charger: AUTO
AI Clock Twister: AUTO
AI Transaction Booster: AUTO

CPU Voltage: 1.35000v
CPU GTL (0/2): AUTO
CPU GTL (1/3): AUTO
CPU PLL: AUTO
FSB Termination Voltage: 1.20v
DRAM Voltage: 1.94v
NB Voltage: 1.26v

Loadline Calibration: Disabled
CPU Spread Spectrum: Disabled
PCI-E Spread Spectrum: Disabled
CPU Clock Skew: AUTO
NB Clock Skew: AUTO